New releases today: Studio Equipment

Notes: Six segment generator. Looping or one shot envelope generator. Chainable, so it can be expanded to link multiple units.

An exact hardware replica of the Mutable Instruments Stages.

Dimensions
14 HP
25 mm deep

Current Draw
80 mA +12V
20 mA -12V
0 mA 5V

Notes: Signal flow is an essential concept in modular synthesis: the path taken by audio or control voltages (CVs) may be long or short, branching or linear, intuitive or highly complex.

While the patch programmability of a modular system is its greatest strength, it can also be a weakness: quick experimentation is often hampered by the need to repatch the synthesiser to change the signal flow.

Pivot 2 offers a unique solution: a compact, fully voltage controlled variable signal router. At the turn of a single knob, any signal can be routed through two external modules in series, parallel or reverse series, as well as any combination in between.

Experiment with patching wavefolders before, after or alongside filters, shuffle multiple delay lines, precisely dial in two-stage audio compression or easily control intricate feedback patches.

Looking beyond the basic signal routing application, Pivot 2 will also function as a complementary pair of counter-acting linear voltage controlled amplifiers (VCAs), a voltage controlled crossfader or a voltage controlled panner.

Analogue voltage controlled send/return router.
Seamless transitions from series, through parallel on to reverse series effect routing.
Also functions as a complementary VCA pair, voltage controlled crossfader or panner.
Impedance-compensated outputs with dual-colour LEDs.
Premium mounting hardware: black screws, black nylon washers and matching hex key.
High-quality components and assembly; designed and made in Belgium.

4 HP | +12: 60 mA, -12: 60 mA

Notes: The Skorn da Bask table top module is the same module as the eurorack version but in a hammond 1590BB enclosure and aluminium panel, it can be powered thru a 2,1mm negative pin power jack, compatible with Boss and Ibanez standard power supplies.

Thanks to their routing options, the VCOs can not only be used to generate audio signals, but for modulating the VCF's cutoff frequency as well. Besides processing internally produced saw tooth waves, the filter is also usable for editing sound coming from other modules. Typical Touell Skouarn, the Skorn da Bask distorts like hell. Primary application: The creation of dirty, experimental sound structures and abstract rhythms.

The front panel of Skorn da Bask shows three areas highlighted in red. These zones contain the connectors and control elements for the oscillators. Each VCO comes equipped with a pitch CV input, a tune potentiometer and two switches for defining the routing as well as the frequency range used. In detail, the oscillators can be connected to the audio or CV input of the filter. Thanks to their range switches, each VCO is able to work with audio or low frequency rates. The pitch input does not follow the standard 1v per octave.

After all, Skorn da Bask is not an ordinary oscillator module, but an experimental sound generator.

The low pass filter features a slope of 24 dB per octave. A potentiometer named FreqaNs regulates the circuit's cutoff parameter, Dasson sets the resonance. For processing external signals, there is an audio input. As long as a cable is plugged into this socket, the VCOs are disconnected from the filter's audio path. Third-company modules, like an envelope or LFO, can influence the VCF's frequency via a CV input. For damping modulation signals coming from the oscillators, there is an attenuator knob. The audio output is equipped with a level potentiometer. High settings lead to juicy overdrive effects.

Notes: The Super 6 is a 12-voice polyphonic, binaural analogue-hybrid synthesizer. A harmonious marriage of state of the art FPGA digital hardware oscillators and voltage controlled analogue tech. It is flexible, powerful and refined with a gorgeous analogue tone. Rich and evolving textures are easily teased from the unique super-wavetable core and can be shaped and manipulated with the binaural analogue signal path and flexible modulation.

Although UDO's first production synthesizer, the Super 6 is a result of many years of hard work and numerous iterations of development. Our mission with the Super 6 has been to harmonise what we love about archetypal electronic instrument design with modern, novel synthesis technologies that excel at generating spatially dynamic results.

In Binaural mode, the Super 6 features a true stereo signal path in which the instrument's twelve voices are twinned to form six stereo 'super' voices. Consequently, the left and right channels - and each of the player's ears - are assigned their own complete synthesizer voice. Parameters for both channels of each super voice may be independently controlled, facilitating the player to create rich and unique stereo images.

The Super 6 is a love-letter to the classic analogue synthesizer, brought firmly into the present with cutting-edge technology under the hood and a no-compromise approach to sound character, build quality and interface design. The rich sound that UDO has been championed for, paired with a robust, compact and inviting form factor with smooth, solid and responsive controls throughout, it cries out to be played.
Binaural analogue

Signal path

In Binaural mode, the Super 6 features a true stereo signal path in which the instrument's twelve voices are twinned to form six stereo 'super' voices. Consequently, the left and right channels - and each of the player's ears - are assigned their own complete synthesizer voice. Parameters for both channels of each super voice may be independently controlled, facilitating the player to create rich and unique stereo images. The effect ranges from subtle to extreme stereo movement, creating an enhanced sense of spatial positioning relative to "conventional" monaural signal-chains panned at their output.

Massive modulation without menus

Enormous flexibility at the player's fingertips through simple controls and a carefully designed front-panel. Going deeper, there is an intuitive and immediate modulation system based around the performance area switches. For those who want to go further, every panel control can be targeted for modulation, all simultaneously and all with unique amounts.

Inspired by the classics, built for today

The Super 6 is an instrument that is borne of a long-held passion for synthesizers. In designing the Super 6 we wanted to create an instrument that feels familiar at first glance, but offers new and inspiring opportunities when delving deeper. The layout and aesthetic is an homage to some of the classic synthesizers that have inspired us for many years - the instrument's features and capabilities bring these ideas firmly into the 21st century.

Analogue voice architecture

Alongside an analogue amplifier section, the Super 6's main filter is an analogue 4-pole, 24 dB per octave, resonant low-pass filter. It is preceded by a voltage controlled high-pass filter that can either be off, fixed, or can also track the low-pass filter cutoff for band-pass operation.

True no-compromise build quality

An instrument is cherished not just for the way it sounds but for the way it feels to play. We have worked tirelessly on the physical design to foster an immediate connection with the player. There has also been no expense spared on the build quality, with a rugged metal housing and solid control elements throughout.

Notes: The Super 6 Desktop is UDO Audio's fully-featured 12-voice polyphonic, binaural analogue-hybrid synthesizer reimagined in a compact and super-flexible package. A harmonious marriage of state of the art FPGA digital hardware oscillators and voltage controlled analogue tech. It is flexible, powerful and refined with a gorgeous analogue tone. Rich and evolving textures are easily teased from the unique super-wavetable core and can be shaped and manipulated with the binaural analogue signal path and flexible modulation.

The desktop Super 6 takes everything the Super 6 is famous for and reimagines it in a more compact and super-flexible package. It is VESA compatible for use with widely-available monitor arms/mounts, rack mountable with a 7U footprint, and comes complete with robust retractable feet for a more ergonomic experience in desktop use settings.

In Binaural mode, the Super 6 features a true stereo signal path in which the instrument's twelve voices are twinned to form six stereo 'super' voices. Consequently, the left and right channels - and each of the player's ears - are assigned their own complete synthesizer voice. Parameters for both channels of each super voice may be independently controlled, facilitating the player to create rich and unique stereo images.

The Super 6 is a love-letter to the classic analogue synthesizer, brought firmly into the present with cutting-edge technology under the hood and a no-compromise approach to sound character, build quality and interface design. The rich sound that UDO has been championed for, paired with a robust, compact and inviting form factor with smooth, solid and responsive controls throughout, it cries out to be played.

Compact, flexible and ergonomic

Offering the flexible and immediate control, gorgeous analogue sound and unrivalled build quality of the Super 6, but in a more compact package. The Super 6 Desktop is a fully-featured Super 6 analogue-hybrid 12 voice synthesizer, housed in a newly designed all-metal chassis. The Super 6 Desktop also includes ergonomic features such as VESA mount compliance, optional rack ears (7U) and robust flip up feet, as well as a huge 24-voice Super 6 polychain option.

Binaural analogue

Signal path
In Binaural mode, the Super 6 features a true stereo signal path in which the instrument's twelve voices are twinned to form six stereo 'super' voices. Consequently, the left and right channels - and each of the player's ears - are assigned their own complete synthesizer voice. Parameters for both channels of each super voice may be independently controlled, facilitating the player to create rich and unique stereo images. The effect ranges from subtle to extreme stereo movement, creating an enhanced sense of spatial positioning relative to "conventional" monaural signal-chains panned at their output.

Massive modulation without menus

Enormous flexibility at the player's fingertips through simple controls and a carefully designed front-panel. Going deeper, there is an intuitive and immediate modulation system based around the performance area switches. For those who want to go further, every panel control can be targeted for modulation, all simultaneously and all with unique amounts.

Analogue voice architecture

Alongside an analogue amplifier section, the Super 6's main filter is an analogue 4-pole, 24 dB per octave, resonant low-pass filter. It is preceded by a voltage controlled high-pass filter that can either be off, fixed, or can also track the low-pass filter cutoff for band-pass operation.

True no-compromise build quality

An instrument is cherished not just for the way it sounds but for the way it feels to play. UDO Audio have worked tirelessly on the physical design to foster an immediate connection with the player. There has also been no expense spared on the build quality, with a rugged metal housing and solid control elements throughout.

Notes: TBC

Notes: Module A-101-8V is a 8-stage phase shifter which uses light-sensitive resistors (LDR) and is a replica of the Compact Phasing A manufactured by the company Schulte in the seventies. The actual phasing circuit is identical to the historic model. Only the illumination control of the LDRs is different: the A-101-8 uses LEDs to illuminate the LDRs, the historic model used incandescent miniature lamps. And the A-101-8 has no built-in LFO but can be controlled by any external control voltage source (e.g. LFO, ADSR, random, Theremin, ribbon controller, sequencer, midi). The phasing offset (i.e. the base value for the phase shifting) and the modulation depth of the external control signal can be adjusted separately. The Compact Phasing A had no offset control but only a depth control for the built-in LFO. Feedback and mixing ratio of the output signal are set by two controls. The audio input is equipped with an attenuator. The module has two audio outputs available (same as the historic model) and a visual display of the phase shifting.

The module has these controls and in/outputs available:

Control Man. : manual control of the phase shift offset (base value)
Control CV: attenuator for the signal applied to the CV socket
Control Feedb.: Feedback or Resonance (similar function as filter resonance/feedback/emphasis)
Control Mix: sets the mixing ratio between original and phase shift signal appearing at output 1
fully CCW: only the modified input signal appears at output 1 (see note below *)
center: a mixture between the modified input signal and the phase shift signal appears at output 1, that's the standard position for the classical phasing effect
fully CW: the pure phase shifted signal appears at output 1 (e.g. for vibrato effects)
Control Input Level: attenuator for signal applied to the In socket
Socket In: audio input
Socket CV: control voltage input
Socket Out 1: audio output 1 (mix signal)
Socket Out 2: audio output 2 (modified input signal)
LED: visual control of the phase shift
The module has some peculiarities (same as the historic model):

The input signal is processed at first by a pre-stage which outputs a "modified" input signal (*). This signal is not processed by the phase shift stages but is affected by the feedback setting. Only when feedback is set to zero this signal is identical to the input signal. Otherwise it contains feedback components.

This signal is output on socket Out 2.
When both output sockets Out 1 and Out 2 are used as stereo channels one obtains a spatial stereo sound effect.

The same signals is also used for the CCW position of the mix control. With mix control fully CCW the unmodified signal appears only if the feedback control is set to zero. Otherwise it contains feedback components.

The historic model had two audio inputs: one 5-pin DIN socket and a 1/4" jack socket. The DIN socket was intended for high-level line signals. When the 1/4" jack socket was used the amplification of the pre-stage increased by about 100. The 1/4" jack socket was intended for low level signals (e.g. electric guitars or microphones). For this feature the A-101-8 has an internal jumper that can be used to increase the amplification. As long as the module is used within the A-100 system usually the lower amplification is used to avoid distortion.

The 8 photo resistors and LEDs are assembled within an small lightproof box. In addition the pc boards are made of lightproof black material to avoid interfering light from other modules or the bus board.

Power consumption: 30mA at +12 V and 30mA at -12 V
Depth: 45mm
HP : 4

Notes: Module A-147-4V is a dual voltage controlled LFO (Low Frequency Oscillator). Each LFO has the five waveforms triangle, sine, rising and falling sawtooth, as well as rectangle available. The rectangle output features manually adjustable pulsewidth and pulsewidth modulation by means of an external control voltage. The core waveform is triangle. The other waveforms are derived from triangle by means of waveform converters. The frequency of each LFO can be adjusted manually and modulated by means of an external control voltage with associated attenuator and polarity switch. By means of a jumper the basic frequency range of each LFO can selected: about 0.02 Hz (~ 50 seconds) ... 2.5kHz or about 0.0017 Hz(~ 600 seconds) ... 220Hz. That way each LFO can be used also as a VCO with a max. frequency of about 2.5kHz. Each LFO features a reset input which can be used to reset the triangle signal.

The module has these controls and in/outputs available:

Control F : manual control of the frequency, for each LFO the frequency range can be selected by means of a jumper from two values (see technical notes)
frequency coverage of control F in the high frequency range: about 0.075 Hz (~ 13 seconds) ... 1,4kHz
frequency coverage of control F in the low frequency range: about 0.007 Hz (~ 140 seconds) ... 125Hz
Control CV: attenuator for the signal applied to the CV socket, by means of a jumper a small positive voltage can be applied to the switching contact of the /CV/ socket, as long as no patch cable is connected to /CV/ socket the CV control then works as fine control for the frequency
Switch CV Pol.: polarity switch for the signal applied to the socket /CV/
Control PW/PM: combined control for manual and CV control of the rectangle pulsewidth:
when no patch cable is connected to socket /P/ the control is used to adjust the pulsewidth (PW) manually
when a patch cable is connected to socket /P/ the control works as attenuator for the external CV signal with a basic pulsewidth of 50:50.
Socket /CV/: frequency control voltage input, in the factory the module is adjusted so that the sensitivity of this input is exactly 1V/octave when the CV control is fully CW.
Socket /R/: reset input, according to the associated jumper the reset input is edge triggered or level controlled (see technical notes for details)
Socket /P/: pulsewidth control voltage input
Sockets with waveform symbol: output of the waveform in question (triangle, sine, rising and falling sawtooth, rectangle)
The output voltage ranges are about -5V ... +5V (10Vpp), except the rectangle output
For the rectangle output one can choose by means of a jumper if the range is about -5V ... +5V or 0...+10V.
LED: visual control of the LFO (triangle)
The inputs of the module are labelled with white characters on black background (in the text included into two slashes). The outputs are labelled with black characters.

Technical notes and special features:

The basic frequency range of each LFO can be selected by means of a jumper. The settings correspond to two different capacitor values for the VCO circuit. The relation between the two ranges is about 1:11. When the upper range is selected frequencies from about 0.02 Hz up to 2.5kHz can be generated. For the lower range the values are about 0.0017 Hz ... 220Hz. To obtain these full frequency ranges external control voltages are required. With the frequency control F only the frequencies mentioned above are possible.

Apart from that the range for the manual control F can be reduced to obtain a finer resolution. For this a jumper has to be removed. The range of control F is then reduced to about 1:4.5 only.

In the factory the starting voltage of the triangle output after a reset is adjusted to 0V, i.e. the triangle starts from 0V with the rising slope after a reset. By means of a trimming potentiometer the starting voltage can be adjusted to another value (e.g. to -5V).

Another jumper is used to set the reset behaviour to edge triggered or level controlled. When set to edge triggered the rising edge of reset signal is used for the reset (independent of the duration of the "high" state of the reset signal). When set to level controlled the triangle output remains at the starting voltage as long as the reset signal is "high". Only when the reset signal turns "low" the triangle starts.

Power consumption: 80mA at +12 V and 70mA at -12 V
Depth: 45mm
HP : 8

Notes: Flame "Fire" percussion synth module

The module is a full 8-way polyphonic drum and percussion synthesizer. It offers different digital synthesis algorithms, which can be distributed over 8 channels. The sound engine delivers virtual analog sounds as well as different digital percussion sounds, which are generated with FM, wavetable or virtual analog synthesis. It is also possible to create sim- ple monophonic bass or synthesizer voices.

During development, particular attention was paid to direct and simple usability with regard to live operation. The hardware essentially consists of two parts (which are deli- vered together). On the one hand there is the basic module with all controls, the display, connections for MIDI, 2x CV inputs and 5 audio outputs.

There is also a separate XFIRE I/O extension with sockets for the 16 analog trigger/gate/CV inputs and 3 additional audio outputs. Both modules are connected via a 60cm long ribbon cable. In this way, the XFIRE module can be installed anywhere else in the rack. The base module is therefore only 22TE wide and can also work alone without the extension as a MIDI expander.

A maximum of 8 audio outputs are available. A stereo pair (outputs 7+8), plus 6 additio- nal individual direct outputs. All outputs are freely configurable. Two pages with settings for panorama and volume are available for the stereo main out.

There is a gate/trigger input and a configurable CV input for each channel. Two additio- nal programmable CV inputs can be used for further controls. Regardless of the analog connection, the module offers full MIDI functionality. Two MIDI inputs and a MIDI output/softthru allow integration into an external MIDI setup. The firmware can be upda- ted via MIDI Sysex. The created KIT data can also be saved or exchanged.

Notes: The "Luskellader Frekans Izel" is a Low Frequency Oscillator (LFO) that can be used to modulate various parameters of the synthesizer, including pitch, filter cutoff, and amplitude. The module has 2 ouputs, with continuous morphing shapes available at the same time, one Square/PWM, one Saw/triangle/inverted saw. The LFO has a speed switch going from low to audio rates. The 2 knobs are : Speed and Morph. The module is 6HP wide and is made with quality components such as Nichicon/Panasonic caps and alpha pots.

HP : 6

Notes: The Touellskouarn "Sil Kontrollet" tabletop module is a LowPass voltage-controlled filter (VCF) The filter is a 12dB per octave low-pass filter that can be self-oscillated, this way it can produce a sine wave with V/Oct tracking capability. This filter has a unique and distinctive sound, characterized by its aggressive resonance and its ability to self-oscillate. Cutoff can be cv controlled. The enclosure is all aluminium and the circuit is made with quality components such as Nichicon/Panasonic caps and alpha pots. The module is powered thru a 2,1mm negative pin power jack, compatible with Boss and Ibanez standard power supplies.

Power supply: 9V DC, negative tip, 20mA

Notes: The Touellskouarn "Sil Kontrollet" eurorack module is a LowPass voltage-controlled filter (VCF) The filter is a 12dB per octave low-pass filter that can be self-oscillated, this way it can produce a sine wave with V/Oct tracking capability. This filter has a unique and distinctive sound, characterized by its aggressive resonance and its ability to self-oscillate. Cutoff can be CV controlled. The module is 6HP wide and is made with quality components such as Nichicon/Panasonic caps and alpha pots.

Power consumption: 20mA at +12V and 20mA at -12V

HP : 6

Notes: Removable disc for use with AMP Electronics' Star Song synthesiser.

*** The Star Song is not included, it is shown in the photo for demonstration purposes only. ***

Notes: Taking its cosmic inspiration from star charts and ancient astrolabes, Star Song is a rotating optical disc-programmed sequencer with a built-in minimalist synthesizer.

Star Song can be used either to play its own built-in pulsewave synthesizer, or in combination with the A.M.P. electronics Wave Expander (sold separately) to drive external analogue and modular synthesizers.

How it is used

To create sequences on Star Song, the seven translucent rings (orbits) of the optical disc are marked with a marker (included) or opaque tape. The disc is removable and additional discs are sold separately, allowing for indefinite storage of your favourite sequences.

The outer six rings control the tuned note selection and note-on/off sequencing. The innermost ring controls the cut-off frequency for the built-in bandpass filter.

Disc on/off and disc direction are toggled from touch contacts on the front panel, and disc speed is controlled from the central rotary control.

Additionally, there are 1/8" inputs to control rotation speed and rotation direction with an external source.

The addition of Wave Expander makes the Star Song into an incredibly versatile Gate(6 channels) and CV (1 channel) sequencer, as well as providing the Star Song's tuned audio oscillator over five separate octave divisions (four audio and one sub-audio), 12 outputs in all to integrate into your modular system.

Multiple Star Song units can be synced by using an external clock signal, and you can even slave Star Song to your existing Melody Oracle/Wave Expander combo.

Sing the cycles of the spheres, with Star Song, a "revolutionary" new sequencer.

Tech Specs:

Disc Rotation: 0~15RPM
Panel Controls: Disc rotation on/off, disc rotation rate, disc rotation reverse.
Synthesizer: Quasi-monophonic pulsewave, 8 tuned notes, each with three octaves used in any combination. Sequenced via optical disc.
Tone Filter: Bandpass, optically-controlled.
Audio Output: 1/4" LINE (5V p-p)
AMP LINK Output: CAT 5 or 6 w/SHIELDED connector (compatible with Wave Expander and future AMP accessories only).
Motor Clock Input: 1/8" 0-12V. ON @>7.5V
Disc Direction Input: 1/8" 0-12V. CCW @>7.5V
DC input: 15VDC, 2.1mm, tip positive (US adapter included)

Notes: A playground of sound

With sounds and tools for any genre and style, Komplete 14 Standard packs the best of NI into one powerful bundle. Explore flagship synths, expressive sampled instruments, and studio-grade effects, including latest releases Kontakt 7, Playbox, 40's Very Own Drums & Keys, and Session Guitarist - Electric Mint, plus fresh additions from iZotope, Plugin Alliance, and Brainworx.

What's new?

Check out the latest and greatest additions to Komplete 14 Standard.

Kontakt 7

The latest version of the world's favourite sampler, with a brand-new updated Factory Library, enhanced browsing, and improved instrument-building technology.

Playbox

Kickstart ideas and refresh your workflow with randomisation, chord generation, and sample layering.

Session Bassist - Prime Bass

The classic sound of a 70s-style single coil electric bass guitar, with over 350 patterns.

Session Guitarist - Electric Mint

The distinct and versatile sound of a 1960 solid-body USA-made electric guitar, with 222 patterns.

BX_Oberhausen

A powerful recreation of a 70's analogue synth legend, with full polyphony of up to 32 voices, created by Brainworx.


Ozone 10 Standard

Mastering made easy. The latest version of the industry's most comprehensive professional audio mastering software delivers AI-powered assistive technology that helps bring balance to your music.
Plugin Alliance effects

Plugin Alliance comes to Komplete 14, bringing all-new effects including Unfiltered Audio's LO-FI-AF, and Brainworx's bx_crispytuner.

Play Series Additions

Fresh Play Series additions, including 40's Very Own drums & keys, Deft Lines, Ignition Keys, Empire Breaks, Soul Sessions, Glaze, and Melted Vibes.

Added expansions

15 new Expansions, including Backyard Jams, Body Mechanik, Bumpin Flava, Mother Board and Neo Boogie, plus latest Massive X Expansions Kino, Wake, Fade, and more.

Take a closer look

Komplete 14 Standard includes 87 instruments and effects, plus 39 Expansions. Explore some of Native Instruments' top picks below.

Platforms for sampling and synthesis

Create just about any instrument you can imagine, with two included builder platforms. Kontakt 7 powers advanced sampling and instruments from NI, as well as hundreds of leading manufacturers, while Reaktor 6 handles the synthesis side of things, with a flexible modular environment for building synths, effects, and more.

Don't fancy diving in deep? Both platforms include comprehensive libraries packed with sampled instruments, synthesizers, plus a whole range of presets, so you can start making music right out of the box.

15 synthesisers

From cutting-edge digital designs to legendary analogue emulations, Komplete 14 Stadard packs a powerful collection of hands-on synths capable of crafting any sound from the ground up. Dip into the vintage warmth of Super 8, explore the modular world of Reaktor Blocks, or discover the possibilities of flagship wavetable synth Massive X. Komplete 14 Standard also sees the addition of Brainworx's bx_Oberhausen - a recreation of a polyphonic 70's icon.

37 sampled instruments

Bursting with multi-sampled instruments, the Komplete 14 Standard library is bigger and better than ever. From workflow gamechangers like Playbox, to songwriting companions like Prime Bass and Electric Mint, there's a tool for every creator. Sample the signature underwater sounds of Drake's producer in 40's Very Own Keys, and let your creativity loose with the latest Play Series instruments Deft Lines, Melted Vibes, Glaze, and more.

9 percussion tools

Discover the vintage rhythm of Abbey Road 60s Drummer, experiment with layering in Polyplex, or tap into techno low-end with TRK-01. Avant-garde electronic percussion and detailed, humanized drum parts are made simple with super-sampler Battery 4, while Play Series additions like 40's Very Own Drums and Empire Breaks have hard-knocking hip hop beats on lock.

19 Effects

Studio shine to sonic sorcery - Komplete 14 Standard's effects suite includes all you need to sculpt, transform, and polish your sounds. Say hello to new Soundwide additions, with iZotope's Ozone 10 Standard for mastering, Brainworx's bx_crispytuner for precise vocal tuning, and Unfiltered Audio's Lo-Fi-AF for added dirt. The latest Guitar Rig 6 Pro offers even more amp modelling and effects, while Raum, Mod Pack, Crush Pack, Replika XT, and other NI favourites give you endless opportunities for creative expression.

38 expansions

Expansions are genre-tailored sound packs full of samples, loops, presets, one-shots, and more. Komplete 14 Standard packs in 38 of them, meaning you can quickly find the sounds you want - from the booming analogue beats of Mother Board, futuristic hip hop flair of Backyard Jams, fierce industrial energy of Body Mechanik, and many more. Massive X Expansions contain 150 presets each, crafted by pro sound designers who have mined its complex architecture for undiscovered audio gold.
More sounds, less searching

It's easy to get set up and find the sounds you need fast.

Always stay up to date

With brand-new search, list, and filter-by-genre functions, Native Access 2 is the improved way to manage all your Native Instruments software. Downloading, activating, and updating all your music creation tools is quick and easy, leaving you free to focus on making music.

Find the sound you're looking for

Komplete 14 Standard packs a lot of sounds, which is great for music making but a lot to search through. Komplete Kontrol is a handy plug-in for browsing through instruments and effects. Each preset has an audio preview, so you can audition each one before loading it up.

Connect with your studio

All the instruments and effects in Komplete 14 Standard come ready to plug and play with NI hardware, so you can spend less time setting up and more time in flow.

Specifications:

System requirements

macOS 10.15, 11 or 12 (latest update)

Windows 10 (64-bit, latest Service Pack) or Windows 11 (latest Service Pack)

Intel Core i5 or equivalent CPU, or Apple Silicon (using Rosetta 2), 4 GB RAM (6 GB recommended)

10 GB free disk space (260 GB for complete installation)

Graphics hardware support for OpenGL 2.1 or higher, and Direct 3D 11.1 or higher

An internet connection is required to install and activate the products in this collection. Once installed, all products can be used offline. Certain products may require additional free downloads.

MASSIVE X requires an AVX compatible CPU.

Supported interfaces

Supports ASIO, Core Audio, WASAPI

Runs in 64-bit VST, AU, AAX hosts

Product includes

Installation files, 25,00 € e-voucher for the Native Instruments web shop, and one "Buy any Plugin for $29.99" e-voucher for the Plugin Alliance web shop.

Additional info

Total download size is 230 GB. You don't have to download all products at once: Native Access allows you to download and install individual KOMPLETE products any time you want.

Required hard disk space depends on how many products/libraries you want to install. To install all products and libraries, 260 GB free disk space is required.

Please note: The installation process may temporarily require up to 80 GB of additional free disk space on your system-drive - even if you're installing KOMPLETE on an external hard drive. This number significantly decreases for smaller products, or if products are being installed one by one.

All products included within a single edition of a KOMPLETE 14 bundle are part of one user license and can only be used as a single entity. A maximum of three installations on three machines are allowed as long as only one installation is used at any given time. The individual products cannot be resold separately

Notes: Create without limits

Komplete 14 Ultimate packs a punch, with even more synths, sampled instruments, and studio-grade effects, as well as fresh additions from iZotope, Plugin Alliance, and Brainworx. Boasting new releases like East Asia, Sequis, and Picked Nylon, plus a range of premium orchestral and cinematic tools including Ashlight and Piano Colors, it's all you need to bring your ideas to life and polish them for release.

What's new?

Check out some of the top new additions to Komplete 14 Ultimate.

Kontakt 7

The latest version of the world's favourite sampler, with a brand-new updated Factory Library, enhanced browsing, and improved instrument-building technology.

Ashlight

A granular instrument specializing in immersive atmospheres, rhythmic textures, and evocative keys for cinematic sound design.

Sequis

An inspiring instrument that unites organic samples with intuitive sequencing to make a playground of acoustic patterns.

Piano Colors

Explore the limits of a grand piano's sonic capabilities with state-of-the-art modulation features.

Action Strings 2

The dramatic sound of a full string orchestra blending realism with creative control, with over 31 GB of dynamic phrases.

Session Guitarist - Picked Nylon

The pure, warm tone of a handcrafted nylon-stringed guitar, with over 200 inspiring patterns plus an additional melody instrument.

Session Guitarist - Electric Vintage

The unmistakable sound of a vintage 50s solid-body electric guitar. Over 230 patterns, and an additional melody instrument.

Spotlight Collection - East Asia

The authentic sound of traditional Chinese, Japanese, and Korean instruments, captured in an intuitive production tool.

Plugin Alliance Effects

Plugin Alliance comes to Komplete 14, bringing all-new effects including Unfiltered Audio's LO-FI-AF, and Brainworx's bx_console N, bx_limiter true peak, and bx_crispytuner.

Ozone 10 Standard

Mastering made easy. The latest version of the industry's most comprehensive professional audio mastering software delivers AI-powered assistive technology that helps bring balance to your music.

Play Series additions

40's Very Own Drums & Keys, Deft Lines, Ignition Keys, Empire Breaks, Soul Sessions, Glaze, and Melted Vibes.

Added Expansions

20 new Expansions, including Rhythm Source, Liquid Energy, Faded Reels, and Backyward Dreams, plus latest Massive X Expansions Fade, Kino, Wake, and more.

System requirements:

macOS 10.15, 11 or 12 (latest update)
Windows 10 (64-bit, latest Service Pack) or Windows 11 (latest Service Pack)
Intel Core i5 or equivalent CPU, or Apple Silicon (using Rosetta 2), 4 GB RAM (6 GB recommended)
20 GB free disk space (770 GB for complete installation)
Graphics hardware support for OpenGL 2.1 or higher, and Direct 3D 11.1 or higher
An internet connection is required to install and activate the products in this collection. Once installed, all products can be used offline. Certain products may require additional free downloads.
Massive X requires an AVX compatible CPU.

Supported interfaces:

Supports ASIO, Core Audio, WASAPI
Runs in 64-bit VST, AU, AAX hosts

Product includes:

Installation files, e-voucher for the Native Instruments web shop, and two "Buy any Plugin for $29.99" e-vouchers for the Plugin Alliance web shop.

Additional info

Total download size is 680 GB. You don't have to download all products at once: Native Access allows you to download and install individual Komplete products any time you want.

Required hard disk space depends on how many products/libraries you want to install. To install all products and libraries, 770 GB free disk space is required.

Please note: The installation process may temporarily require up to 120 GB of additional free disk space on your system-drive - even if you're installing Komplete on an external hard drive. This number significantly decreases for smaller products, or if products are being installed one by one.

All products included within a single edition of a Komplete 14 bundle are part of one user license and can only be used as a single entity. A maximum of three installations on three machines are allowed as long as only one installation is used at any given time. The individual products cannot be resold separately.

Notes: Sporting a unique look, the V-Stand Pro is as versatile as it is visually striking. You can use it in a standing or sitting position, it's highly versatile (use it to hold DJ gear or mixers), and provides plenty of space at the base for all your keyboard pedals. The V-Stand Pro is also extraordinarily portable, folding up into a mere 28.5" x 9.5" x 6" space!

Technical Specifications

Part Number: 17479
Capacity: 68 kg
Height: 27" - 40.75" (656mm - 1035mm)
Arms Depth: 17" (432mm)
Legs Depth: 24" (610mm)
Arms Width: 19.5"-29" (495mm-737mm)
Legs Width: 38" (965mm)
Folded Dimensions: 28.5" x 9.5" x 6" (724mm x 241mm x 152mm)
Weight: 8.27 kg

Notes: The DISTURBANCE is an extreme filter, flanger, and phaser with modulation like you've never heard before.

DISTURBANCE's controls allow for a wide range of sounds to be sculpted perfectly to your needs. The 'Tensity' knob changes the feedback amount and structure of all effects, with two totally different intensity options to choose from for each disturbing modulation. The Filter allows for deep swells and piercing resonance with highpass and lowpass options.

The Flanger creates a classic modulation sound with options for watery, multi-tap delay matrixes or a screaming flange with distorted feedback. Last but certainly not least, the Phazer mode is a psychedelic 8-stage phaser sound with options for mellow filtered scoops on one side and combination phaser/flanger on the other.

But that's not all - the pedal introduces a brand-new way to control an effect: The custom designed modulation core lets you pause the LFO where it stands and listen to the strange world of frozen modulation. Not only does this new system control its own sounds, the DISTURBANCE includes a CV OUT jack which lets the modulation control signal be sent to whatever device dares let it in.

Go forth and DISTURB and bend, break, and twist your sound!

Notes: Disaster Transport

Legacy Reissue

The Original Delay Modulation Machine

Limited to 3,500 units worldwide. Behold! The newest incarnation of one of Earthquaker Devices' most beloved pedals ever, the Disaster Transport. For those of you well versed in the pedal's celebrated history, you might notice some differences on this beautifully sparkly box. A new Mod Mode switch allows you to bend or stretch the modulation wave. The new Mod Speed switch offers three rates of modulation, from bizarrely animated gradual climbs and steep drop offs to rapid chorus and intense vibrato.

The delay line has been redesigned to reduce the noise floor and improve the quality of the delay. Plus, it's now filtered to sound more like an analogue delay than any of the previous versions. With knobs to control the Speed, Intensity, Mix, Repeats, and Time; this analogue-voiced digital delay sits perfectly in the background with an evolved ambiance, but can also be dialled in for the dramatic effect of your choosing.

EQD initially set out to recreate the original Disaster Transport pedal in its earliest form, but the OG of EQD, Jamie Stillman, couldn't resist tinkering and improving the whole thing, so you just got upgraded, my friend. In doing so, EQD redesigned the delay line to reduce the noise floor and improve the quality of the delay. The output was boosted with a cleaner mixing section; it's now filtered to sound more like an analogue delay than any of the previous versions.

EQD added a Mod Mode switch that allows you to choose between bending and stretching the modulation wave. The Bend setting offers a subtler vibe closer to a traditional chorus sound, while the new Stretch option gives you loads of pitch-stretching modulation to run wild with.

The other difference you probably spotted with your eagle eye is the Mod Speed three-position toggle switch. The Slow setting is excruciatingly slow and can produce bizarrely animated gradual climbs and steep drop offs. The Fast setting can go from a rapid chorus to an intense vibrato, while the Medium setting is the most traditional rate similar to the classic Memory Man circuit with a nice range to it.

The newly designed enclosure features knobs to control the Speed, Intensity, Mix, Repeats, and Time, with Modulate and Activate switches, making this a highly customizable pedal to get the delay sound of your dreams. Thanks to the ramp modulation circuitry, you can turn the delay time down and start to use feedback and modulation at a higher setting to harness a bizarre modulator and achieve subtle to wild chorus-type effects. Or set your delay time how you want to set it and use your modulation rates to set your tempo, so you can strum or pluck to the climbs and drop offs to match your riffs. The possibilities are endless.

Controls

1. Speed: Controls the speed of the modulation. The Speed operates in three ranges (Slow/Fast/Medium) selected by the Mod Speed toggle switch. The Disaster Transport uses a Ramp wave for the modulation. You'll find this to be much more intense than most modulated delays. Think of it as a traditional Triangle wave that falls off a cliff in mid-cycle, creating a drastic pitch bend in its wake. Or don't and just think about whatever you want.

2. Intensity: Controls how much the LFO modulates the delay time. More subtle chorus type effects are achieved with less intensity and more intensity will yield wild pitch stretching and bending. The overall modulation style can be made more or less subtle by using the Mod Mode toggle switch to select Bend or Stretch.

3. Mix: Sets the volume level for the delay signal. Hear more of what you just played 30-600ms ago by turning this up.

4. Repeats: Controls the intensity of delay feedback from no repeats at zero to self-oscillation at max. Let the past pile up on you until it implodes.

5. Time: Sets the delay time from around 30ms at zero to 600ms at max. Everyone needs more time; you are offered about 600ms worth.

6. Mod Speed: Three position toggle switch that sets the range in which the Speed operates.

7. Mod Mode: Two position toggle switch to choose the modulation style. Bend is more of a traditional chorus type modulation and Stretch is a wilder pitch stretching modulation.

8. Modulate: This foot-operated switch features Flexi-Switchr Technology and turns the modulation on and off.

9. Activate: This foot-operated switch features Flexi-Switchr Technology and turns the effect on and off.

Tech Specs

Dimensions: 3.65 x 4.65 x 2.25 in. (93 x 118 x 57 mm) with knobs
Current Draw: 35 mA
Input Impedance: 1 MO
Output Impedance: 1 kO

Flexi-Switch Technology

This device features Flexi-Switchr Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.

For momentary operation, hold the footswitch down for as long as you'd like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power

This device takes a standard 9 volt DC power supply with a 2.1mm negative centre barrel. Pedal-specific, transformer-isolated wall-wart power supplies, or multiple isolated-output supplies, are always recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise.

*** Do not run at higher voltages! ***

Notes: Adjustable Studio Monitor Floor Stand

The adjustable monitor floor stand by QTX is perfectly designed for studio and home use, providing a sturdy platform for your speakers. Adjust the height of the stand using the hand fastener and safety pin to one of the 5 height positions, up to 540mm high. Foam surface pads are provided to minimize unwanted vibrations and ensure your monitor stays firmly in place. This stand is recommended for use with small and midfield studio monitors. Maximum weight capacity.

Plate dimensions: 240 x 230mm
Base: dimensions: 250 x 225mm
Height: 300mm (minimum)
Height adjustments: 340mm, 390mm, 440mm, 490mm, 540mm
Max. weight load: 15kg
Weight: 2.53kg

In the box

The box for this item contains:
1pcs adjustable studio monitor floor stand

Notes: Elevated Desktop Speaker Stands

These desktop speaker stands from QTX are compactly designed for use in the studio, home and office. These stands provide a platform for your speakers allowing perfect positioning and optimize listening height. Foam surface pads are provided to minimize unwanted vibrations. These stands are designed for use with small nearfield monitor speakers and bookshelf speakers.

Plate dimensions: 160 x 130mm
Base dimensions: 190 x 130mm
Height: 130mm
Max. load: 5" speaker
Dimensions: 190 x 130 x 130mm
Weight: 2.3kg

In the box

The box for this item contains :
Elevated Desktop Speaker Stand Pair