DJ Accessories

Notes: An amazing and compact Bluetooth device that will open a new world of wireless audio enjoyment both at home and on the move. Simply connect using the audio cable provided to your TV, projector or other audio device and stream wirelessly to Bluetooth headphones, speakers or soundbars. Alternatively connect to a set of traditional headphones, amplifier or in-car entertainment system and you can then pair with your smartphone, tablet or other Bluetooth devices. With Multi-point support for shared listening, a 10m transmission/reception range and in-built rechargeable battery providing up to 8 hours playback from a single charge, this handy little device really is your perfect Bluetooth partner!

The box for this item contains:

- Bluetooth transmitter/receiver unit
- 3.5mm audio lead
- RCA adaptor lead
- USB charging lead
- User guide

Specifications

Bluetooth version: v4.2 with multipoint support
Bluetooth profile: APTX, A2DP, AVRCP
Bluetooth range: Up to 10m (clear line of sight)
Operating time: Up to 8 hours (transmit), 6 hours (receive)
Charge time: 2 hours
Battery: 200mAh
Dimensions: 42 x 42 x 10mm
Weight: 20g

Notes: All the Battle Breaks released by DJ $ HIN, also known as King of Battle Breaks, over the past 16 years + Bonus Beats + Secret sound sources, etc. There are plenty of sound sources in the USB memory that can be used not only for DJ training but also very useful for producers.

The cartridge type USB memory has an original shape that cannot be found anywhere else, with the design created from scratch.

Easy to use with a key ring. It will be an item that boasts details that give off a cool presence as a USB storage for everyday use and carrying around!

Featuring high-resolution sound from all of DJ Shin battle break series. All titles that were released in the analog to so far Recorded in (24bit 48khz) and MP3 (320kbps).

In addition, scratches, juggling, instruments that can be used frequently for DJ mixes, single drum sounds (kick, snare, hi-hat, etc., drum loops, various sound effects, tones, voices, scratches and drum loops that can be used with skip-proof specifications in timecode mode, etc. A total of more than 1800 sounds are recorded in folders for ease of use.

Notes: "KOSULI BREAKS," features many of the Japanese turntablist world stars. Based on the concept of "Japan," the 27 skip-less tracks, easy to use even for beginners as they're standardized at 133.33 BPM, are a spark of hope in this chaotic world.

The tracks contain a wealth of Japanese sounds, as well as globally popular words such as "samurai" and "ninja," making it a viral content not only in Japan but also overseas.

"I told the artists that the concept was 'Japan,' but then I let each of them create freely. Although the record was produced in the midst of the Covid-19 pandemic, I believe that the artists' various thoughts and feelings came together to create battle breaks that give hope to the future. I expect "KOSULI BREAKS" to bring new excitement to the turntablism scene." - by KOSULIST-J.

KOSULI producer KOSULI is the original japanese word for what is known as the DJs technique scratching. It is now also a brand created to have a new influence on the world when passion is spread by all creatives souls expressing their thoughts and feelings through scrubbing/scratching. KOSULI is for every soul that keeps scratching, for every kosulist.

Notes: Stereo 3.5mm mini-jack to stereo 3.5mm mini-jack audio cable for connecting minirig speakers.

- 1m length
- Gold plated connectors

Notes: USB 5v input and output to 5.5/2.1mm barrel plug.

Notes: Minirig Mic & Instrument Adaptor Cable

Notes: MINIRIG charging cable replacement. For charging your Minirig speaker from a USB power supply.

USB 5v input and output to 5.5/2.1mm barrel plug

Notes: The Ortofon - Flightcase Twin Concorde MKII is an upholstered case for the Ortofon Twin MKII Concorde Series.

Notes: Comprises 1 PC stylus brush and 1 PC screwdriver in a plastic cylinder.

Notes: By simply placing the Libelle on top of your turntable the Libelle can tell you how level your system is. From here it gives you the perfect indication of what part needs adjusting to give you a perfectly level turntable.

Notes: Ortofon's new Test Record is designed to allow you to verify your HiFi system in the most natural audio surroundings at home. The Test Record contains special test signals developed for analysing cartridge performance as well as its interaction with your tonearm and turntable.

Before testing your cartridge, please verify the HiFi system's functionality. The left speaker should be connected to the left amplifier channel and vice versa; both speakers should work in phase and be optimally positioned in the room.
The Test Record is designed to be played through your system with in-built RIAA equalization. Volume control is recommended to be set at a moderate signal level.

Please refer to your turntable and tonearm's instructions for correct installation and alignment, adjust tonearm to be parallel to record surface, set Vertical Tracking Force and anti-skating according to the cartridge's recommended technical data, and adjust stylus overhang.

Each side of the record consists of 15 tracks which have been cut from 1-4 and 5-15:

1-4 - Frequency sweep - a tool for checking frequency response:
There are several factors which can affect frequency response, including cable capacitance, cartridge loading, tracking force and worn parts. Because of this, it can be difficult to achieve perfectly flat frequency response. Sometimes by making small compromises in the cartridge loading, a better overall frequency response can be achieved. Considering the above the signal must be clean throughout the sweep.

5-8 - Reference tone for testing channel output:
With this standard reference signal is it possible to check the correctness of the connections of the left and right channels, channel balance and speed of the turntable.

9-14 - Tracking ability test, 315 Hz lateral modulation:
These tracks contain a 315 Hz signal, recorded at increasing pick amplitudes of 50, 60, 70, 80, 90 and 100 micro-meters. Please refer to your cartridge's tracking ability value specified in the technical data sheet. Your cartridge should be able to track the actual level without audible distortion. Inability to track can be heard as a departure from a pure tone or a sputtering and intermittent tone. To determine if it is one or both channels, the balance control can be utilized. In case of differing tracking ability in the left and right channels it is probably necessary to readjust the anti-skating correction of the tonearm. If both channels fail to track properly, then vertical tracking force should be increased until no further improvement of tracking force can be obtained.

15 - Square Wave Form 2.7 msec duty cycle 3:7:
When monitoring the output of your cartridge with an oscilloscope you'll then see a square wave located precisely above each other if the connection from the cartridge is correct.

After successful completion of the above test procedures, you can ensure that your cartridge is optimized. Still the human ear is very sensitive to difference in tone distortion; its level depends on the stylus condition and record wear.

To maintain optimal sound reproduction and to minimize wear on your records as well as on your stylus, we recommend the following procedure before and after each playback:
- Remove dust carefully from record surfaces by using a fine antistatic brush or cloth before every use.
- Please remember to remove dust from the diamond tip before and after playback of each record.
- In order to keep electrical contacts clean and to lubricate the knurled nut on the tonearm, Ortofon recommends occasionally a light spray of contact cleaner like DeoxIT rGold G-Series into the tonearm socket.

It should be noted that some phono equalizers may generate some tone distortion, which cannot be referred to the cartridge.

Notes: Designed to work on portable turntables, iPads and other audio sources, the KUTTER now can work as a full-on fader cutting on both sides.

With two inputs, one out, post and thru assignments for audio, reverse switch for the scratcher in you, this fader has everything. Even connect one turntable or even two for mixing!

Specs:

Packaging made from recycled material and recyclable
Size: 40mm x 78mm x 30mm
Weight: 40g

Includes:

Kutter
3 x mini jack cables
Velcro
Instruction manual

Notes: Designed to work on portable turntables, iPads and other audio sources, the KUTTER now can work as a full-on fader cutting on both sides.

With two inputs, one out, post and thru assignments for audio, reverse switch for the scratcher in you, this fader has everything. Even connect one turntable or even two for mixing!

Specs:

Packaging made from recycled material and recyclable
Size: 40mm x 78mm x 30mm
Weight: 40g

Includes:

Kutter
3 x mini jack cables
Velcro
Instruction manual

Notes: STOKYO portable record player spindle caps. Each set contains 1 RED, 1 BLACK & 1 YELLOW cap.

The spincap fits over the spindle of your record player and keeps your vinyl and slipmat in place when you are moving them about.

Another handy item from Stokyo.

Made to fit:

- Numark PT01 SCRATCH
- Numark PT01 USB
- ION Mobile LP
- Vestax Handytrax

Notes: The Zomo Spirit Level water bubble level is the perfect tool for leveling your turntables, speakers or other devices. It also makes levelling your tonearm or headshell as easy as pie.

An indispensable tool for every professional DJ.

Details
Diameter: 3 cm
Height: 1,2 cm