Synthesisers

Notes: Great value from this curious little semi-modular FM synth. Two carriers, two modulators and virtual analogue delay give you plenty of creative power. Ideal for drones, weirdo synth parts and special FX.

Supplier's Notes:
The Mystic is an experimental FM synth with 2 carrier frequencies, 2 modulators, and an analogue-style delay. All of the synth parameters are controllable via cv as well as time control in the delay section.

The Mystic generates colossal waves that swirl, echo, ascend, and plunge into an ever-changing, sonic playground. Transcend reality and let the mystic guide the way!

Powering Tip

The Mystic uses a 9VDC, negative-tip, 200ma power supply. It is a standard Boss-style power supply used for most effects pedals. The power supply is sold separately.

Once plugged in, the Mystic is powered up and ready to go. Simply unplug it from the wall when not in use.

Output: line level

A note about the output level

The Mystic runs at line level, to be used with pedals and other devices that also run at line level. If using with Eurorack, the output level needs to be converted, just as you would with any guitar pedal.

There are several Eurorack modules that do this, but the one Recovery use and recommend is the Strymon AA.1.

Output jack

The Mystic requires a 3.5mm cable to connect the audio output to other devices.

Latching switch

Use this to latch the sound on and off. Up is on, and down is off.

Controls

Carrier frequency controls

Each carrier works together to build a waveform. Usually it's CF2 that responds to pitch tracking, but that can vary depending on the setting. Think of CF1 and CF2 as 2 sign waves being folded in various ways. Sending independent CV into each one will not get traditional 1 v/oct pitch results, but a combination of pitch, texture and tone.

Modulator controls

These are used to shape the tone and texture of the folded waveform you've created with CF1 and CF2. Modulation rate will control the speed of the modulation texture.


Momentary button

Use this to momentarily turn sound on and off. The momentary Button only functions when the Latching Switch is in the off (down) position.

Latching switch

Use this to latch the sound on and off. Up is on, and down is off.

Delay time controls

Controls the delay / echo time.

Delay feedback

Controls the number of delay / echo repeats.

Delay mix

Controls the volume of the delay / echo signal.

Volume

Controls the overall output volume of the Mystic.

CV controls

These will accept CV voltage of up to +5 volts. The parameter you are controlling should be at 12 0'clock to get the most effect from the voltage input.

Notes: The Nanobox series kicks off with a tiny wavetable synth. 1010music's Fireball offers eight-voice polyphony, touchscreen control, built-in effects and custom user wavetables. Small but spicy.

Supplier's Notes:
Red Hot Wavetable Synthesis

Bring some heat to your music creation workflow with Nanobox | Fireball, a polyphonic wavetable mini synthesizer with intuitive touchscreen control. Featuring eight voice polyphony, two wavetables and an oscillator, Fireball unlocks a huge array of sounds, from punchy and aggressive leads to atmospheric pads. Touchscreen X/Y control allows you to instantly morph and shape sounds with the swipe of a finger. Choose from hundreds of professionally designed presets and wav files, or quickly create your own patches with deep parameter control via the 2" touchscreen. Integrate fireball seamlessly with your existing tabletop gear or create on-the-go thanks to a compact design that fits in the palm of your hand.

What is included:

Nanobox | Fireball compact polyphonic granular synthesizer with touchscreen control
MicroSD card with presets and wav files
USB power cord
Type B TRS MIDI To MIDI 5 Pin DIN adapter
Quick Start Guide

Technical Specs:

Includes 123 presets and 103 wavetables
Wavetables use 2048 samples per cycle and 256 cycles
Power: USB-C connection 5V, 500mA
3.5mm audio input and output
Maximum input and output level: 2Vrms
DAC and ADC resolution: 24-bit
Internal resolution: 32-bit
Sample rate: Oscillators: 96kHz Rest of Engine: 48kHz
MIDI Input: 3.5mm Type A/B auto sensing
MIDI Output: 3.5mm Type A/B selectable
Clock Input: 4 PPQ
MIDI support: Note On/Off, Mod Wheel, Sustain, Pitch Bend, Mono & poly Aftertouch, assignable CCs, and clock
H x W x D: 1.5" x 3.75" x 3"
Weight: 0.25 lbs.

Notes: One of 1010music's first miniature Nanobox instruments, the Lemondrop is a granular synth in a compact format. Touchscreen interface gives full hands-on control of the four-voice sound engine.

Supplier's Notes:
Freshly Squeezed Granular Synthesis

Explore a freshly squeezed approach to granular synthesis with Nanobox | Lemondrop, a polyphonic granular mini synthesizer with intuitive touchscreen control. Four voice polyphony, two granulators and an oscillator provide a wide sonic paletteifrom lush environmental pads to rugged and glitched-out textures. Instantly morph and shape sounds with the swipe of a finger using touchscreen X/Y control. Choose from hundreds of professionally designed presets and wav files, or quickly create your own patches with deep parameter control via the 2" touchscreen. Integrate lemondrop seamlessly with your existing tabletop gearior create on-the-go thanks to a compact design that fits in the palm of your hand.

What Is Included

Nanobox | Lemondrop compact polyphonic granular synthesizer with touchscreen control
MicroSD card with presets and wav files
USB power cord
Type B TRS MIDI To MIDI 5 Pin DIN adapter
Quick Start Guide

Technical Specs

Includes 153 presets and 311 wave files
16 grains per oscillator for a total of 128
Sample memory per oscillator 30 seconds
Power: USB-C connection 5V, 500mA
3.5mm audio input and output
Maximum input and output level: 2Vrms
DAC and ADC resolution: 24-bit
Internal resolution: 32-bit
Sample rate: 48kHz
MIDI Input: 3.5mm Type A/B auto sensing
MIDI Output: 3.5mm Type A/B selectable
Clock Input: 4 PPQ
MIDI support: Note On/Off, Mod Wheel, Sustain, Pitch Bend, Mono & poly Aftertouch, assignable CCs, and clock
H x W x D: 1.5" x 3.75" x 3"
Weight: 0.25 lbs.

Notes: A complete AE modular system in a one-row Rack; containing the following modules:

- MASTER
- 2 OSC/D
- VCO
- NOISE
- LFO
- SVFILTER
- ENV
- 2VCA
- 2ATT/CV
- MIXER
- SAMPLE&HOLD
- DELAY

The case is extendable; via a joint kit (not included) another case of this width can be attached at a free angle; the bus is connected via a short connector cable between both cases.

It is shipped complete with power supply unit, MIDI breakout cable, a bunch of patch wires of every type and a quick start guide.

Notes: The timeless Model D, reinvented in Eurorack

The AJHSynth MiniMod Keyz synth is an exciting new modular monosynth featuring the much acclaimed MiniMod modules, which recreate the vintage circuitry and sound of the early RA Moog Model D in Eurorack modular format. It functions as a standalone keyboard synthesiser, or can be expanded even further by patching it to other Eurorack modules, with excellent connectivity. These are partnered with the feature-packed Cre8audio Niftykeyz controller keyboard, which has been given a vintage makeover with custom-designed, American Walnut end cheeks. It has a huge specification, including a full size 49 note keybed that outputs Pitch CV's, gate CV's, Velocity and Aftertouch CV, along with a multi mode arpeggiator to give you total control over expression and sound.

MiniMod Modules

The MiniMod Keyz is an absolute powerhouse of a monosynth, with three VCO's, two Shaped sine Sub bass generators, classic 24dB vintage Ladder filter, 6dB & 12dB High Pass VCF, Dual Cascaded VCA, Dual Contour generators, Glide Noise module, Ring modulator, Tap-Tempo VC-LFO and onboard second multi-function modulation LFO.

Glide Noise

Glide with added Up/Both/Down function, including correct glide slope profile, along with Hold function that recreates the "Glide only when key is depressed" behaviour. Noise generator with White, Pink and DC Red noise CV modulation source.

Discrete Transistor VCO x 3

Three Discrete Transistor Core VCO's, much acclaimed analogue design featuring the circuitry of the early and very rare RA Moog oscillator which is often acknowledged as the fattest analogue VCO in Eurorack.

Ring SM

AJH Synth's hugely versatile three-in-one module, with fantastic sounding ring modulator based on the EMS VCS3 discrete transistor design, two Sub bass generators with unique, shaped sine waveforms to add -1 and -2 octave waveforms, and last but not least, a five channel DC coupled vintage Moog CP3 transistor mixer.

Transistor Ladder Filter

The Moog Ladder Filter is renowned for its beautiful creamy sound, and the Transistor ladder Filter from the early Model D was the pinnacle in terms of sound, with its unique overdriven circuitry and roll off of resonance at low frequencies. It has featured on countless recordings over the last 50 years or so.

Low Fat Filter

Voltage controlled High Pass filter with 6dB and 12dB slopes. It can be used standalone, or can be combined with the MiniMod Ladder Filter to create a fully customisable band pass filter, allowing the range of passbands to be cherry-picked rather than fixed.

Discrete Cascaded VCA

The Model D cascaded VCA is an essential part of creating the classic MiniMoog sound, because in addition to it's VCA function, it adds harmonic distortion and further character to the sound. There were three different gain configurations used in Model D, with the very early RA Moog and Musonics models having the highest distortion and most sought after sound, so this is the circuitry that we use here. It is actually two VCA's in series, hence the cascaded label. The second VCA is normally unused, however by patching to the Master IN we can use this second VCA here to control Velocity from the keyboard.

Dual Contour generator

The contour generators play a larger part in the sound of the Model D than many people realise. There are two factors that make them unique, firstly the exponential slope when it's used in conjunction with the (near) linear slope of the original VCA, which is responsible for the famous Model D "punch". Secondly, the re-trigger behaviour is quite unique, as multiple re-triggering increases the output level. AJH Synth have faithfully reproduced all of these essential characteristics in the MiniMod Contour Generators.

Tap Tempo VC-LFO

A considerable limitation of the Model D was the lack of any LFO's for modulation, so VCO 3 had to be switched from Audio to LFO mode to provide modulation. As the MiniMod synth benefits from a full open modular architecture AJH Synth have added two LFO's, the first being the onboard LFO that is hard wired to the Modulation wheel, and the second and much more powerful addition being the Tap Tempo VC-LFO. Its huge specification includes built in VCA for CV control of modulation amount, tap tempo and CV control of LFO rate, 16 different modulation and random voltage waveforms, each with a unique PWM style twist function. Clock in and out, and CV control of all parameters.

NiftyKeyz controller Keyboard

By combining these MiniMod modules with the Niftykeyz keyboard controller AJH Synth have created a stand alone MiniMod system that gives the huge, rich AJHSynth sound in a stand alone instrument with unrivalled performance capability. The open architecture of the Eurorack system already allows unlimited onboard patching and easy expansion by patching to other external Eurorack cases and modules, but now we can just as easily connect to a DAW, other Midi synths and pro audio equipment. It can also be used as a master controller for a DAW or other Midi sound modules. Needless to say, it lends itself very well to live performance as a standalone monosynth. Here is a list of the main features of this very versatile keyboard controller:

High quality full size 49 key synth action keybed with CV outputs for both Velocity and aftertouch.
Five mode arpeggiator, including swing control, latch and sequencer mode. Range control allows Arpeggiator span to be varied from one to four octaves.
Two mode modulation wheel that can output either a variable CV voltage or control the level of the LFO 1 waveforms.
Internal LFO 1 that can generate Ramp, Saw, Triangle, Square or Random waveforms
Front panel octave switch -1/ 0 / +1 octaves
Transpose up or down in semitones by up to one octave.
Selectable pitch bend range, either +/- 2 semitones or +/- 1 octave.
Clock input and output
Two active multi's for splitting CV and audio signals
Switchable between Gate retrigger or legato (no retrigger when second note is pressed) modes.
Dual outputs, each with 2 x mix jacks, so four signals can be routed to outputs
Aftertouch and expression pedal smoothing adds a glide to slowly increase the effect with time, selectable from 0 to 5 seconds.
Four Pitch CV outs and 4 Gate outs allows four voice modular polyphonic control and keyboard can be split into two zones.
Autochord function

Connectivity:

Works as a fully featured polyphonic Midi controller for DAW or other Midi instruments, with 5 pin Din and class compliant USB sockets
Sustain Pedal input triggers arpeggiator latch function
Expression pedal input, this generates either a 0 to +5V or 0 to +10V range to the Expression CV jack.
Two outputs, both with 1/4" and 3.5mm jacks, and output level controls
Headphone output to full size stereo 1/4" jack, with separate headphone level control.
Midi In with 5 pin Din socket and class compliant USB socket. Incoming Midi Velocity and Aftertouch dataCV jacks, and CC#1 is routed to Modulation CV
Midi out over USB and 5 pin Din allows it to be used as a polyphonic midi controller keyboard fro your DAW or otherMmidi synths, with local off capability.
Generates midi clock from internal arpeggiator and recieves Midi clock in.

Notes: The AMP Electronics Melody Oracle is a pattern generating sequencer/synthesizer with a game-board style switching interface. It utilizes a pattern generating method not found on any other sequencer.

The top panel of the Melody Oracle consists of six zones. Each zone is a switching matrix for generating a particular aspect of a musical pattern.

Each zone has seven downward-pointing triangular contacts, and one upward pointing contact. The outer contacts determine the frequency of on-and-off switching behavior for the zone. The central upward pointing triangle in each zone serves to invert that zone's pattern.

The upper three zones are called registers, and are used for gating the three octaves of the synthesizer.

The lower three zones are called "intervals" and are used for creating note pattern sequences. Although there are only three interval zones, they are added (in a 3-bit binary system) to create eight different notes, set via fine tuners found on the back of the unit.

MELODY ORACLE is rhythmic, logical, and musical, yet it is continually surprising and inspiring: the border of chaos and order.

Game-board style synthesizer.
8 fine tuners for variable tuning.
30 metal melorhythmic funnels used to control and manipulate Melody Oracle.
2 eight-sided dice and graphic manual including included game instructions for Melody Oracle
1/4" Line Out

Notes: Taking its cosmic inspiration from star charts and ancient astrolabes, Star Song is a rotating optical disc-programmed sequencer with a built-in minimalist synthesizer.

Star Song can be used either to play its own built-in pulsewave synthesizer, or in combination with the A.M.P. electronics Wave Expander (sold separately) to drive external analogue and modular synthesizers.

How it is used

To create sequences on Star Song, the seven translucent rings (orbits) of the optical disc are marked with a marker (included) or opaque tape. The disc is removable and additional discs are sold separately, allowing for indefinite storage of your favourite sequences.

The outer six rings control the tuned note selection and note-on/off sequencing. The innermost ring controls the cut-off frequency for the built-in bandpass filter.

Disc on/off and disc direction are toggled from touch contacts on the front panel, and disc speed is controlled from the central rotary control.

Additionally, there are 1/8" inputs to control rotation speed and rotation direction with an external source.

The addition of Wave Expander makes the Star Song into an incredibly versatile Gate(6 channels) and CV (1 channel) sequencer, as well as providing the Star Song's tuned audio oscillator over five separate octave divisions (four audio and one sub-audio), 12 outputs in all to integrate into your modular system.

Multiple Star Song units can be synced by using an external clock signal, and you can even slave Star Song to your existing Melody Oracle/Wave Expander combo.

Sing the cycles of the spheres, with Star Song, a "revolutionary" new sequencer.

Tech Specs:

Disc Rotation: 0~15RPM
Panel Controls: Disc rotation on/off, disc rotation rate, disc rotation reverse.
Synthesizer: Quasi-monophonic pulsewave, 8 tuned notes, each with three octaves used in any combination. Sequenced via optical disc.
Tone Filter: Bandpass, optically-controlled.
Audio Output: 1/4" LINE (5V p-p)
AMP LINK Output: CAT 5 or 6 w/SHIELDED connector (compatible with Wave Expander and future AMP accessories only).
Motor Clock Input: 1/8" 0-12V. ON @>7.5V
Disc Direction Input: 1/8" 0-12V. CCW @>7.5V
DC input: 15VDC, 2.1mm, tip positive (US adapter included)

Notes: Blue version of this unique touch-activated instrument with built-in speaker, allowing you to trigger notes with one hand and modulate the timbre via touch pads. Unorthodox tones, unorthodox interface. Lots of fun. Also available in green.

Supplier's Notes:
Touch Tones is a touch activated auto harmonic synthesizer, with a 3 octave tuning range, XOR logic modulator, Harmonicon auto harmony generator, and two onboard bandpass filters. The left side of the Touch Tones holds three capacitive touch pads for playing notes, while the right side contains a set of 7 touch pads to modulate the different parameters sequencing the synthesizer.

Three octave range plus XOR modulator.
Harmonicon automatic harmony keys play a perfect 5th of each tuned ROOT note.
Dual Luma filters for active timbral shaping via light control.
Wear the Touch Tones for Function or Fashion with the included chain lanyard.

Notes: Unique touch-activated instrument with built-in speaker, allowing you to trigger notes with one hand and modulate the timbre via touch pads. Unorthodox tones, unorthodox interface. Lots of fun.

Supplier's Notes:
Touch Tones is a touch activated auto harmonic synthesizer, with a 3 octave tuning range, XOR logic modulator, Harmonicon auto harmony generator, and two onboard bandpass filters. The left side of the Touch Tones holds three capacitive touch pads for playing notes, while the right side contains a set of 7 touch pads to modulate the different parameters sequencing the synthesizer.

Three octave range plus XOR modulator.
Harmonicon automatic harmony keys play a perfect 5th of each tuned ROOT note.
Dual Luma filters for active timbral shaping via light control.
Wear the Touch Tones for Function or Fashion with the included chain lanyard.

Notes: Wave Expander bridges the gap between the Melody Miracle and Touch Tones synthesizers, and the rest of the synthesizer world. Control other synths by sending CV and gate signals via Wave Expander, and dial in the right amount of control with onboard CV tuners. Outputs are visually indicated with the Chrominancer color window at the center of Wave Expander, bringing cosmic insight to the signals at hand.

Melody Oracle and Touch Tones expander module
Use AMP synthesizers to control external gear
12 outputs (6 CV/6 Gate)
CV Range: 0V to +12V
Chrominancer color window

Notes: Inspired by the early 80s Synton Syrinx, the SER-2020 is a semi-modular monster, featuring an excellent formant filter section, unique Touch 'N Bend Control and MPE-compatible MIDI interface.

Supplier's Notes:
The SER-2020 is a monophonic semi-modular analog synthesizer with an formant filter section, designed to use as standalone synthesizer or in combination with Eurorack modules. Inspired by the Synton Syrinx *(1) added the flexibility of an MS-20. Its filter design features a combination of a 24dB/octave VC Low Pass Filter, and two independent Resonant VC Peak Filters for precise and dynamic sound shaping. The sound is ranging from solid bass sounds to articulated formant effects. Other features on the SER-2020 are the Touch 'N Bend Control together with the MPE (MIDI Polyphonic Expression) capabilities makes the SER-2020 a special instrument which response to its player. The flexible routing makes the SER-2020 a versatile machine for sound effects.

Key Specifications:
2 VCO's (CEM3340 based)
1 Sub-Oscillator
Ring Modulator
Noise Generator
Audio Mixer
Multi-Mode Sync & Sync D-Tune
3 VCF's (CEM3350 based)
2 ADSR's
2 LFO's with Reset & Shaper Modes
Auto-Glide
Multiple Triggering
Touch 'N Bend Pad
Bend Assign
Sample and Hold
Semi Modular Setup - CV inputs and outputs
Signal and Headphone output.
MIDI interface
USB MIDI interface
MPE compatible - Sensitive for; Strike (note-on velocity), Press (aftertouch), Glide (pitch bend), Slide (brightness) and Lift (note-of velocity).

The SER-2020 consist of two VCO's and one sub-oscillator, driven by VCO 1. Both VCO's deliver a triangle, sawtooth, square wave and pulse signal, which can be selected. A rich spectrum can be obtained with Pulse Width Modulation of VCO 1 and VCO 2. The LFO 1 and 2 signals can be feed to the pulse width modulation section introducing phase shift effects and Doppler frequency shifts. Since the both VCO's have a separate LFO for PWM, chorus-like effects can be obtained by controlling both pulses with different LFO speeds. VCO 2 can be synchronized to VCO 1 in different modes. Synchronization is applied when two or more VCO's have to produce exactly the same pitches, without phase shift or beat effects. When VCO 2 is detuned from VCO 1 another effect occurs, which will result in quite dramatic tone colors.
Each VCO has an individual output, also the noise generator and sub-oscillator has individual outputs.

The most important sections of this synthesizer is the filter. The SER-2020 features a very extensive filtering system, which consists of the standard 24 dB/octave low pass filter and two independent band pass filters, which together form the Voltage Controlled Formant filter.
Both band pass filters have a frequency control and a resonance control for setting the selective amplification in the pass band. The bandpass filters are equipped with a control voltage mixer for LFO, ADSR and key range voltages. The LFO control can be used for the external modulation input.
The low pass filter is an standard 24 dB/octave roll-off. It has a frequency control and a modulated CV mixer from several sources like LFO, ADSR and the key range. The LFO control can be used for the external modulation input. Also the resonance of the low pass filter can be controlled.

The SER-2020 has two ADSR generators, of which one is used to control the internal VCA, and the other one to control the filter section. The control signal can be inverted by means of the ADSR controls in the filter section, so that the filters can be swept in opposite directions.
ADSR 1 and 2 have a positive and negative (inverted) direct output available on the patch panel.

The SER-2020 has two independent Low Frequency Oscillators (LFO's) of which the rate can be controlled, and for LFO 2 also the wave shape.

LFO 1 generates a triangle wave which exclusively is routed to the pulse width modulation control input of VCO2. LFO 1 also generates a square wave and a pulse wave. The square wave is available as direct output on the patch panel. The pulse wave of LFO 1 is internally routed to the sample and hold generator as clock source.

LFO 2 is more versatile and can be used for the modulation of the VCO's and the filters. Moreover LFO 2 can be used as a one shot generator which means that a signal is generated much alike an Attack/Release generated function. Except for the LFO 2 rate control with the preset knob, it also can be controlled dynamically with the pad.

Several sections in the synthesizer can be controlled with the bend pad, by pressing it with the left hand index and middle finger. The pressure sensitivity for the VCO, VCF and VCA can be adjusted. The touch 'N bend pad also reacts on the MIDI modulation control and the MIDI brightness (CC#74) control for MPE compatibility.
Also the speed of the rise/decay mode of the LFO 2 is possible. Pressing the UP pad will result in a shorter cycle, and pressing the DN pad in a longer cycle.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Inspired by the early 80s Synton Syrinx, the SER-2020 is a semi-modular monster, featuring an excellent formant filter section, unique Touch 'N Bend Control and MPE-compatible MIDI interface.

Supplier's Notes:
The SER-2020 is a monophonic semi-modular analog synthesizer with an formant filter section, designed to use as standalone synthesizer or in combination with Eurorack modules. Inspired by the Synton Syrinx *(1) added the flexibility of an MS-20. Its filter design features a combination of a 24dB/octave VC Low Pass Filter, and two independent Resonant VC Peak Filters for precise and dynamic sound shaping. The sound is ranging from solid bass sounds to articulated formant effects. Other features on the SER-2020 are the Touch 'N Bend Control together with the MPE (MIDI Polyphonic Expression) capabilities makes the SER-2020 a special instrument which response to its player. The flexible routing makes the SER-2020 a versatile machine for sound effects.

Key Specifications:
2 VCO's (CEM3340 based)
1 Sub-Oscillator
Ring Modulator
Noise Generator
Audio Mixer
Multi-Mode Sync & Sync D-Tune
3 VCF's (CEM3350 based)
2 ADSR's
2 LFO's with Reset & Shaper Modes
Auto-Glide
Multiple Triggering
Touch 'N Bend Pad
Bend Assign
Sample and Hold
Semi Modular Setup - CV inputs and outputs
Signal and Headphone output.
MIDI interface
USB MIDI interface
MPE compatible - Sensitive for; Strike (note-on velocity), Press (aftertouch), Glide (pitch bend), Slide (brightness) and Lift (note-of velocity).

The SER-2020 consist of two VCO's and one sub-oscillator, driven by VCO 1. Both VCO's deliver a triangle, sawtooth, square wave and pulse signal, which can be selected. A rich spectrum can be obtained with Pulse Width Modulation of VCO 1 and VCO 2. The LFO 1 and 2 signals can be feed to the pulse width modulation section introducing phase shift effects and Doppler frequency shifts. Since the both VCO's have a separate LFO for PWM, chorus-like effects can be obtained by controlling both pulses with different LFO speeds. VCO 2 can be synchronized to VCO 1 in different modes. Synchronization is applied when two or more VCO's have to produce exactly the same pitches, without phase shift or beat effects. When VCO 2 is detuned from VCO 1 another effect occurs, which will result in quite dramatic tone colors.
Each VCO has an individual output, also the noise generator and sub-oscillator has individual outputs.

The most important sections of this synthesizer is the filter. The SER-2020 features a very extensive filtering system, which consists of the standard 24 dB/octave low pass filter and two independent band pass filters, which together form the Voltage Controlled Formant filter.
Both band pass filters have a frequency control and a resonance control for setting the selective amplification in the pass band. The bandpass filters are equipped with a control voltage mixer for LFO, ADSR and key range voltages. The LFO control can be used for the external modulation input.
The low pass filter is an standard 24 dB/octave roll-off. It has a frequency control and a modulated CV mixer from several sources like LFO, ADSR and the key range. The LFO control can be used for the external modulation input. Also the resonance of the low pass filter can be controlled.

The SER-2020 has two ADSR generators, of which one is used to control the internal VCA, and the other one to control the filter section. The control signal can be inverted by means of the ADSR controls in the filter section, so that the filters can be swept in opposite directions.
ADSR 1 and 2 have a positive and negative (inverted) direct output available on the patch panel.

The SER-2020 has two independent Low Frequency Oscillators (LFO's) of which the rate can be controlled, and for LFO 2 also the wave shape.

LFO 1 generates a triangle wave which exclusively is routed to the pulse width modulation control input of VCO2. LFO 1 also generates a square wave and a pulse wave. The square wave is available as direct output on the patch panel. The pulse wave of LFO 1 is internally routed to the sample and hold generator as clock source.

LFO 2 is more versatile and can be used for the modulation of the VCO's and the filters. Moreover LFO 2 can be used as a one shot generator which means that a signal is generated much alike an Attack/Release generated function. Except for the LFO 2 rate control with the preset knob, it also can be controlled dynamically with the pad.

Several sections in the synthesizer can be controlled with the bend pad, by pressing it with the left hand index and middle finger. The pressure sensitivity for the VCO, VCF and VCA can be adjusted. The touch 'N bend pad also reacts on the MIDI modulation control and the MIDI brightness (CC#74) control for MPE compatibility.
Also the speed of the rise/decay mode of the LFO 2 is possible. Pressing the UP pad will result in a shorter cycle, and pressing the DN pad in a longer cycle.

Notes: Explore and create your own sounds

Discover Anyma Phi, the essential physical modelling synthesizer. Your portal to creating new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

The best of both worlds

Anyma Phi blends the classic ingredients of electronic music, like oscillators and filters, with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Create Unique Sounds; sound design for all

The matrix provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation: Excite, Vibrate, Resonate, Global, and Animate.

Infinite Possibilities; a semi-modular powerhouse

Beyond the matrix lies an insanely powerful semi-modular synthesis engine where you can harness a wide variety of oscillators and effects, and control them effortlessly using an impressive modulator system. Going so deep into sound design has never been easier before with such a small box!

Anyma Phi Editor; standalone, but well-connected?

The Anyma Phi can hold up to 200 patches, and everything you need to create them is right on the machine. You can also benefit from the large screen of your computer (PC or Mac) to edit, manage and share patches even more easily, in a streamlined environment that displays all the synth modules at once and their interactions in real time. Learn more about the Anyma Phi's Updates and Downloads.

MIDI Controller; In tune with its environment

With its small form factor, it can sit on your keyboard, or anywhere on your desk. You can control it using any MIDI controller, keyboard or sequencer, with first-class support for wind controllers, like Sylphyo. And it also shines with World and microtonal music*!

Just Tap and Scratch; the world is your oyster

With its stereo input, you can also use the Anyma Phi as a versatile effects processor for your other gear, or use any external sound to excite its resonators and other physical models. And you don't even need a mic to get interesting sounds: just tap and scratch directly on the case of the Anyma!

Technical specifications:

Hybrid monophonic synthesizer, with physical modelling components
Memory: 200 patches
Stereo audio outputs:
L-R 1/4" mono line jack outputs
1/4" stereo headphone jack output
Stereo audio inputs:
1/4" stereo jack audio input
Internal piezoelectric mic when external input unplugged
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine:
3 oscillator slots (more than 40 types, including wind/string physical models, modal resonators, virtual analogue and digital algorithms)
5 effect slots (more than 30 types, including resonators, granular processors, and FM operators) along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots (more than 40 types, including envelope generators, LFO, curves, interpolators, slew limiters, sequencers, physical and algorithmic processes, etc.)
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with sidechain input and min/max/curve/smoothing
Responsive to pitch, pitch-bend, velocity, breath control/expression, as well as 4 other controller inputs (with MIDI learn)
External MIDI CC control for the matrix and the entire patch (via NRPN)
World-class microtonal support: up to 8 custom tunings, 50 onboard presets, onboard editor, MTS import/export
Built-in arpeggiator: 15 patterns, internal/external MIDI clock sync, custom triggers
Support for up to 3-note paraphony when building a patch
External audio processors
Automatic random patch generation (optional)
Free software editor/librarian (Mac/PC)
225 x 120 x 70 mm (8.9 x 4.7 x 2.8") and 900 gr (2 lbs)
Included: Anyma Phi, 5V PSU and USB cable
Designed and made in France

Notes: Explore unique sonic possibilities with this semi-modular digital synth, combining physical modelling with spectral sound sources, versatile effects and complex modulators.

Supplier's Notes:
An affordable hybrid monophonic synthesizer that allows you to create new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

Anyma Phi blends the classic ingredients of electronic music with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Anyma Phi is compact enough to stand on your keyboard, or anywhere on your desk, and is compatible with any MIDI controller, such as keyboards, sequencers, or even wind controllers, including Aodyo's own Sylphyo.

Whether you play live or record in the studio, design sounds or play presets, Anyma Phi will become an indispensable tool. It can even be used as a stand-alone effects processor, or as part of a guitar effects pedal setup.

The heart of the Anyma Phi is the matrix, which provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation:

With its matrix, Anyma Phi offers a straightforward way to tweak, explore, and create sound universes. It also provides easy ways to make your sound react to your MIDI controllers with mapping shortcuts. But don't be fooled by the simplicity!

If you want to dive deeper, you can take control of the powerful semi-modular synth engine beyond the matrix, with oscillators covering a wide range of synthesis techniques, effects, and modulators.

By connecting those together, you can create any kind of sound, and control it any way you want.

Anyma Phi offers you:
Up to 3 oscillators (sound sources)- physical models, classic spectral, noise souces, external input
Up to 5 effects: resonators, filers - EQ, pitch shifter, ring mod, delay - reverb, chorus - phaser, drive - folder
Up to 8 modulators: envelopes, LFOs, curves, slew limiter, math & logic

This amounts to 69 different module types available, including 30 sources, 22 effects, and 17 modulators.

Technical specifications:
Hybrid monophonic synthesizer
Stereo audio output:
Two 1/4" mono line jack outputs
One 1/4" stereo headphone jack output
1/4" stereo jack audio input (internal piezoelectric mic when external input unplugged)
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine :
Memory: 200 patches
3 oscillator slot
5 effect slots along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots, including envelope generators, LFO, curves, interpolators, slew limiters, etc.
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with a sidechain input
Responsive to pitch, pitch-bend, velocity, breath control / expression, as well as 4 other controller inputs

Additional features:
Percussive playing surface
Patch librarian / editor
Extended memory

The percussive playing surface will allow you to tap and scratch your sounds directly on the case, making your performance even more expressive and fun! This would be made possible by integrating a piezoelectric contact microphone into the case. The resulting sound would be available to use on the Anyma as an audio input, ready to be fed into resonators and effects!

You can edit patches directly on your Anyma, as well as send and receive patches via MIDI SysEx. But what about something more comfortable and powerful?

This software will allow you to easily manage and share patches, as well as edit them in depth in a streamlined environment on your PC or Mac, by making all the synth components directly visible and showing their interactions.

With more memory, you can have a huge library of sounds at your fingertips, or you can make many variations of your patches without having to worry about space or having the computer editor around to make backups!

Let's free the Anyma Phi from the shackles of the Western 12-tone equal temperament! A440 be gone!

Notes: The ARP 2600 is arguably the most iconic and recognizable synthesizer of all time. Having been used in countless records, film scores, TV shows and game soundtracks since its appearance from the 70's through to today, the ARP 2600's sound remains an essential part of the music world.

The new ARP 2600 M delivers the sound admired around the world, in a more compact and portable format and including added features that make it the ideal incarnation of this historic synth.

When the ARP 2600 FS was announced in January 2020, it quickly became a phenomenal success with musicians all over the world recognizing the faithfulness to the original ARP 2600.

The ARP 2600 M is around 60% the original size, making it lighter, more portable and easier to place and use in a studio. It integrates the same analogue circuitry and components as the ARP 2600 FS, thus faithfully reproducing the characteristic ARP sound.

The ARP 2600 M is built in Japan with the same care and extraordinary quality standard as the ARP 2600 FS, and uses the same analogue components to accurately reproduce the sound and feel of the original.

The Spring Reverb has been re-engineered and adapted to the new size body to the same lush effect.

The ARP 2600 M comes with a dedicated Carry Case that not only protects your instrument, but also makes it easier to transport, thanks to its custom casters with special anti-shock damping technology.

There is also enough space to carry other gear together, like your favourite volca, SQ-64 or MIDI controller!

It is not by chance that the ARP 2600 has been so extremely popular to this day.

More than a synthesizer, the ARP 2600 M is a complete sound design studio. Even today, the ARP 2600 stands as a bridge between the individual elements of modular synthesis and the immediacy of a production / performance instrument. Included are an ample supply of oscillators, envelopes, a filter and amplifier - all of the building blocks of analogue synthesis. But the ARP 2600 M goes even further, with a spring reverb tank and even a pair of built-in monitor speakers. Also present is much of the versatility of a vintage modular system, including a ring modulation, lag and voltage processors, an envelope follower, audio preamp, a clock-able switch, noise source, a sample-and-hold module, signal inverters, an auxiliary mixer, and even a set of parallel-wired/multi jacks.

The new ARP 2600 M is not only faithful to the original, it also includes an array of added features that will make it even easier to use:

Plug and play: Connect any class compliant MIDI controller such as a KORG microKeys, nanokeys or SQ-64 to one of the ARP 2600 M's USB ports (USB-A and USB-B) and automatically get full control of your instrument!

Resized: The new size makes it easier to visualize your patch and also allows you to use shorter patch cables

Filter Choice: Two types of filters from two versions of the original ARP 2600(4012 type, 4072 type)

More MIDI: 5-Pin DIN plug MIDI IN added

Modern Control: Pitch-bend, Modulation, Portamento ON/OFF and Portamento ON/OFF can be controlled through MIDI CC messages (USB/DIN MIDI)

Normalized voltage: The threshold of the trigger signal required to activate the ADSR through the S/H GATE JACK has been reduced from 10V to 5V, making it much easier to use in combination with other gear such as volcas or Eurorack modules

Tweaked Parameters: Improved Attack and Release time ratios

Easy Connections: L/R Stereo Output Jack (instead of XLR)

Speakers turn automatically off when using headphones- improved, smoother sliders

Celebrating the rebirth of this iconic synth, the first 1000 units will come with a special colour road case, as well as a KORG microKEY2-37 so you can start playing right away!

The ARP 2600 FS comes with a diverse variety of music software from Izotope including "Ozone Elements" which lets you not only create songs but also master them using AI, "Skoove" which will help you improve your keyboard playing skills, "Reason Lite" DAW software, as well as software synths from KORG and other brands.

In other words, the moment you get your hands on this synthesizer you'll have a variety of tools to help you take your music to the next level.

Notes: Full-scale kit version of the legendary ARP Odyssey, reissued by Korg. Simple DIY assembly with no soldering required, replicating the iconic sound of an analogue classic.

Supplier's Notes:
With switchable sawtooth and square waveforms, pulse width modulation, oscillator sync, ring modulation, and pink or white noise, the sound of the ARP Odyssey is legendary. The new ARP Odyssey FS Kit offers enthusiasts the unique opportunity to assemble this iconic synth with no technical knowledge or soldering required. The kit features the same analogue circuitry as the original ARP Odyssey FS, complete with a full-sized keyboard and the option to switch between filters from all three historical revisions.

The Synth Odyssey

Originally produced by ARP in 1972, this iconic two-oscillator analogue synth can be heard on tracks from Abba, Herbie Hancock, Devo, Jean-Michele Jarre, Ultravox, Jon Lord, Yellow Magic Orchestra and more. With switchable sawtooth and square waveforms, pulse width modulation, oscillator sync, ring modulation, and pink or white noise, the sound of the ARP Odyssey is legendary.

In 2015, ARP's history was thrust into the spotlight with the revival of the ARP Odyssey. This was just the beginning. From the ARP ODYSSEY FS with its full-size keyboard, to the long awaited ARP 2600 FS and ARP 2600 M, ARP synths once again stand at the forefront of the modern music scene.

Build the legacy

Staying true to the ARP Odyssey FS, this build-it-yourself kit uses the same analogue circuitry, preserving the original warm and rich sound. The kit also features the original specs of the Rev. 3 model with a full-size keyboard and a iconic black panel design with orange lettering.

To help simplify assembly, a pictorial guide is included and no technical knowledge (or soldering) is needed! To commemorate the unique experience of building it yourself, it is distinguished from any other ARP Odyssey with its own unique serial number engraved into an elegant metal plate.

Control

The original PPC (Proportional Pitch Control) based on a rubber pad has been reproduced. Press the rubber pad with your finger to control pitch bend or vibrato depth in proportion to the pressure.

A portamento slider and transpose switch are included, and you can even use a switch to select the way in which Rev1 and Rev2/3 of the original ARP Odyssey differ as to whether portamento is applied the moment that you operate the transpose lever.

Connect

The ARP Odyssey FS Kit is a versatile analogue synthesizer with multiple connectivity options. It has both 1/4" jack and XLR outputs, an audio input jack for external processing, and a headphone jack for self-feedback. The instrument also features CV, GATE, and TRIG jacks for sending and receiving analog signals, and includes both 1/4" and mini-size patch cables. Additionally, it has a MIDI IN connector and USB MIDI port for connection to a computer or other MIDI device. The GATE OUT and TRIG IN jacks can be connected to play legato without triggering the EG.

Specs

Keyboard: 37-note (Standard key or Full size key, No velocity sensitivity, No aftertouch)
Maximum Polyphony: 2 voices for duophonic; normally monophonic

Controllers
Transpose Positions: 2 octaves down, normal, 2 octave up
Proportional Pitch Control: b (Pitch down) Pad: about -2 / 3 octave; - (Modulation) Pad; # (Pitch-up) Pad: about +2 / 3 octave

Noise Generator: Noise Spectrum Types (white and pink)

Portamento: Maximum Speed: about 0.01 msec./oct; Minimum Speed: about 1.5 sec./oct

VCO (Voltage Controlled Oscillator)
Waveforms: Sawtooth, Square, Pluse (Dynamic Pluse)
Frequency Range: VCO-1 in low freq. mode, 0.2 Hz - 20 Hz; VCO-1 and VCO-2 (audio range) about 20 Hz - 20 kHz
Warm Up Drift: 1/30 semitone from turn on max
Pulse Width: 50 % - 5 %
Pulse Width Modulation: ADSR, +45 % - LFO, +15 %
Voltage Controlled Response: 1 V/oct
Maximum Frequency Shifts: LFO sin wave, +1/2 oct., LFO square wave, +1.5 oct., ADSR, +9 oct. - S/H, +2 oct.
* VCO-1 is low note priority, VCO-2 is high note priority.

VCF (Voltage Controlled Filter)
Types: Low pass (I: 12 dB/oct., II III: 24 dB/oct.)
Frequency Range: 16 Hz - 16 kHz
Maximum Usable Q: 30
Resonance: 1/2 - self oscillate
Voltage Controlled Response: C3 key (left edge): 0 V, C6 key (right edge) 3 V

VCA (Voltage Controlled Amplifier)
Dynamic Range: 80 dB

Ring Modulator
Type: Digital
Input Signal: VCO-1, VCO-2 (square wave)

Sample & Hold
Command Sources: Keyboard or LFO trigger
Sampled Signals: VCO-1 sawtooth wave and square wave, VCO-2 square wave and pink noise

ADSR Envelope Generator
Attack Time: 5 msec. - 5 sec.
Decay Time: 10 msec. - 8 sec.
Sustain Level: 0 - 100 % or Peak
Release Time: 15 msec. - 10 sec.

AR Envelope Generator
Attack Time: 5 msec. - 5 sec.
Release Time: 10 msec. - 8 sec.

Control Input Jacks
Pedal: 6.3 mm monaural phone jack
Portamento Foot Switch: 6.3 mm monaural phone jack

Audio Output Jacks LOW
Connector: 6.3 mm monaural phone jack
Maximum Output Level: -20 dBu@ 10 k ohm load
Output Impedance: 10 k ohm

Audio Output Jacks HIGH
Connector: XLR connector
Maximum Output Level: +4 dBu@ 1 k ohm load
Output Impedance: 330 ohm

Headphones Jack
Connector: 6.3 mm stereo phone jack
Maximum Output Level: 50 mW + 50 mW@ 33 ohm load
Output Impedance: 10 ohm
* Controllable by volume knob.

External Audio Input (Ext Audio Input) Jack
Connector: 6.3 mm monaural phone jack
Maximum Input Level: -10 dBu
Input Impedance: 22 k ohm
MIDI Connector: IN
USB Connector: Type B

CV IN/OUT Jacks
Keyboard CV (IN/OUT):
1 V/oct.
Connector: 3.5 mm monaural phone jack

GATE IN/OUT Jacks
GATE IN: +3 V (minimum)
GATE OUT: +10 V, key down; 0 V all keys up
Connector: 3.5 mm monaural phone jack

TRIG IN/OUT Jacks
TRIG IN: +3 V pulse min., 10 ?sec. Duration minimum
TRIG OUT: +10 V pulse on key depression, 10 ?sec. Duration
Connector: 3.5 mm monaural phone jack

Power Supply: AC adapter (DC 12V) + power cable
Power Consumption: 7.1 W
Dimensions (W x D x H): 585 x 466 x 163 mm / 23.03" x 18.35" x 6.42"
Weight: 7.3 kg / 16.09 lbs.
Included Items: AC adapter (DC 12V), power cable, phone cable, mini-phone cable

Notes: Updated take on Artiphon's unique instrument, now with built-in sample engine. Loop, manipulate and create all in the unit, with built-in speaker and expressive motion sensor options.

Supplier's Notes:
Hold out your hands and meet Orba 2, the follow-up to Artiphon's award-winning synth, looper, and controller. Orba 2 has everything you loved about the original with multiple ground-breaking upgrades. Now, you can play any sound imaginable with its unique sample engine. Listen through the built-in speaker, or plug in and get loud. Customize your instrument with the Orba App and share your creations with friends. Take your creativity to new heights as you take Orba 2 anywhere you go.

Play any sound in the world
Orba 2 features a brand new sound engine that includes sampled audio recordings. This means you can now play instruments like electric guitars and upright pianos, as well as more adventurous sounds like vocals, found sounds, and custom artist songs. Imagine conducting an orchestra in the park with no strings attached and no screens required.

Create your own instruments
Orba 2 players can also capture or import their own sounds to create completely unique instruments. With the press of a button in the Orba App, everything around you can be turned into an Orba preset. A bicycle bell, a bird singing, or your roommate's amazing voice can all be played, looped, and shared as a musical melody. Sample recording requires a cabled USB connection.

Loop songs in seconds
Orba 2 allows you to record loops right on the device itself. Using Drum, Bass, Chord, and Lead, you'll be able to layer sounds to create songs that are uniquely yours. Orba 2 also has a quantize feature that snaps your musical phrases to the beat so that every moment fits perfectly into the groove. And since Orba 2 has far more memory than its predecessor, you'll be able to make way longer songs: up to 128 bars!

Play with gestures
Orba 2's touch and motion sensors combine to capture even the most subtle micro - movements. Its improved ceramic - like playing surface simultaneously reacts to the nine simple gestures: Tap, Press, Radiate, Tilt, Shake, Spin, Vibrato, Move, and Bump. Each gesture can control the onboard synth engine or your MIDI music software of choice. With unprecedented express ive potential, you'll never play the same note twice.

MIDI control
Use Orba to control your MIDI - based software and hardware instruments (via USB - C or wirelessly via Bluetooth MIDI). Orba works with GarageBand, Ableton Live, Logic Pro, Pro Tools, Cubase , FL Studio, as well as any MIDI - compatible mobile app. In addition, Orba is fully compliant with the new standard for MIDI Polyphonic Expression (MPE), making it capable of multiple independent note expressions.

What's in the box?

Orba
USB Cable
Quickstart Guide

Dimensions

3.14" (diameter) x 2" (height)

I/O
USB-C (USB 2.0 Class Compliant Audio/MIDI)
3.5mm (1/8") TRS Analog Headphone Stereo Out


Bluetooth
Bluetooth LE MIDI (MIDI only)
Note: Windows 10 does not currently support Bluetooth LE MIDI
Speaker System
3W built-in active speaker system

Compatibility

iOS 11 and newer
Android 9 and newer
macOS 10.12 and newer
Windows 10 (64 bit)

Note: Firmware updating requires a cabled USB connection and can only be done from a desktop computer.

Note: Transferring a sample from your device to Orba 2 requires a cabled USB connection.

Notes: *** B-STOCK: Box opened, but product is in excellent condition and in perfect working order ***


Updated take on Artiphon's unique instrument, now with built-in sample engine. Loop, manipulate and create all in the unit, with built-in speaker and expressive motion sensor options.

Supplier's Notes:
Hold out your hands and meet Orba 2, the follow-up to Artiphon's award-winning synth, looper, and controller. Orba 2 has everything you loved about the original with multiple ground-breaking upgrades. Now, you can play any sound imaginable with its unique sample engine. Listen through the built-in speaker, or plug in and get loud. Customize your instrument with the Orba App and share your creations with friends. Take your creativity to new heights as you take Orba 2 anywhere you go.

Play any sound in the world
Orba 2 features a brand new sound engine that includes sampled audio recordings. This means you can now play instruments like electric guitars and upright pianos, as well as more adventurous sounds like vocals, found sounds, and custom artist songs. Imagine conducting an orchestra in the park with no strings attached and no screens required.

Create your own instruments
Orba 2 players can also capture or import their own sounds to create completely unique instruments. With the press of a button in the Orba App, everything around you can be turned into an Orba preset. A bicycle bell, a bird singing, or your roommate's amazing voice can all be played, looped, and shared as a musical melody. Sample recording requires a cabled USB connection.

Loop songs in seconds
Orba 2 allows you to record loops right on the device itself. Using Drum, Bass, Chord, and Lead, you'll be able to layer sounds to create songs that are uniquely yours. Orba 2 also has a quantize feature that snaps your musical phrases to the beat so that every moment fits perfectly into the groove. And since Orba 2 has far more memory than its predecessor, you'll be able to make way longer songs: up to 128 bars!

Play with gestures
Orba 2's touch and motion sensors combine to capture even the most subtle micro - movements. Its improved ceramic - like playing surface simultaneously reacts to the nine simple gestures: Tap, Press, Radiate, Tilt, Shake, Spin, Vibrato, Move, and Bump. Each gesture can control the onboard synth engine or your MIDI music software of choice. With unprecedented express ive potential, you'll never play the same note twice.

MIDI control
Use Orba to control your MIDI - based software and hardware instruments (via USB - C or wirelessly via Bluetooth MIDI). Orba works with GarageBand, Ableton Live, Logic Pro, Pro Tools, Cubase , FL Studio, as well as any MIDI - compatible mobile app. In addition, Orba is fully compliant with the new standard for MIDI Polyphonic Expression (MPE), making it capable of multiple independent note expressions.

What's in the box?

Orba
USB Cable
Quickstart Guide

Dimensions

3.14" (diameter) x 2" (height)

I/O
USB-C (USB 2.0 Class Compliant Audio/MIDI)
3.5mm (1/8") TRS Analog Headphone Stereo Out


Bluetooth
Bluetooth LE MIDI (MIDI only)
Note: Windows 10 does not currently support Bluetooth LE MIDI
Speaker System
3W built-in active speaker system

Compatibility

iOS 11 and newer
Android 9 and newer
macOS 10.12 and newer
Windows 10 (64 bit)

Note: Firmware updating requires a cabled USB connection and can only be done from a desktop computer.

Note: Transferring a sample from your device to Orba 2 requires a cabled USB connection.

Notes: This is Orba - a synth, looper, and controller that lets you play with intuitive gestures like tapping, sliding, and waving.

Play immediately with the onboard synthesizer, built-in speaker, and four playing modes.

Control anything.

Use MIDI over Bluetooth or USB to connect to all of your favourite music-making apps and hardware synths.

And this is Orbacam

Using Orbacam: theiOS companion app that lets you share Orba videos with friends.

Gestures

Orba's touch and motion sensors capture even your most subtle gestures. Pick it up and hold it, or just reach over and play a few notes while it's sitting on your desk. Tap it with one hand or both, with your fingertips or thumbs, or shake and wave it through the air. You can slide around each pad, or go crazy with some vibrato. It's all up to you.

The Orba synth

Orba's revolutionary internal synthesizer was designed to respond to the way you move. Its wide range of Drum, Bass, Chord, and Lead sounds have been tuned for real-time control via Orba's intuitive touch and motion gestures.

Synth specs

Hybrid synth architecture: East Coast subtractive meets a West Coast toolset.

Morphing oscillators mix square, saw, triangle, and novel harmonic-rich waveforms, and multiple dynamic envelopes evolve the sound as you play.

Physical modeling in the palm of your hand Orba's waveguide creates unique instrument sounds with acoustic character, from vibrating strings to resonant tubes.

Full MPE MIDI compatibility allows the player to sculpt and modulate each note independently from one another.

Players will be able to select from dozens of presets using the Orba app, available for iOS, Android, Mac, and PC.

The Orba app

Get the most out of your Orba with the Orba companion app from Artiphon. Designed to take your everyday music-making even further, the Orba app offers endless customization with an easy-to-use interface.

Connect wirelessly using MIDI over Bluetooth. Then explore a library of Songs and Presets that feature different sounds, tunings, and tempos. Record loops, then easily save, edit, and organize your creations - even add custom artwork for each track.

Orbacam
Connect Orba as a controller for Orbacam, the first app that lets you create music directly in videos. With just a few taps, you can now simultaneously play beats & melodies, sync visual effects, and shoot videos ready to share with friends.

MPE MIDI controller

Bluetooth + USB

Orba is MPE MIDI class-compliant and works with all of your favorite MIDI production software. Whether it's the free Orba companion app or your DAW of choice, we've got you covered.

Use Bluetooth MIDI to connect Orba to your favorite DAW and play any digital instrument you can imagine.

What's in the box:
Orba
USB Cable
QuickStart Guide

Dimensions: 3.14" (diameter) x 2" (height)
I/O
USB-C (USB 2.0 Class Compliant Audio/MIDI)
3.5mm (1/8") TRS Analog Headphone Stereo Out
Bluetooth: Bluetooth LE MIDI (MIDI only)
Note: Windows does not currently support Bluetooth LE MIDI
Speaker system: 3W built-in active speaker system
Battery: Lithium Polymer Battery
1250 mAH
4h average operating time
80% capacity after 300 charging cycles
Charging at max of 395ma - ~2W
Compatibility: iOS 11 and newer
Android 9 and newer
macOS 10.12 and newer
Windows 10 (64 bit) and newer
Note: Firmware updates require a computer and USB connection to complete.

Notes: The lovable oddball of the Arturia range, this brilliant hybrid synth combines versatile wavetable and digital oscillators with analogue filters. Touch keyboard gives uniquely expressive control.

*** New firmware update (26th October 2021) *** Arturia are happy to announce another major new firmware update for MicroFreak, bringing massive new creative functionality for users free of charge.

Firmware V4.0 elevates this hybrid desktop synthesizer's status as a sound design powerhouse even further:
New WaveUser sound engine
Allows for user wavetables(!!)
64-new presets
Sequencer Unison & Chord Voices
Faster Oscillator Encoder Response
....and more!

This update, plus ALL the of previous updates (see Vocoder & Noise Engineering oscillators etc.) cement the MicroFreak as one of the most interesting, powerful and flexible synthesizers on the market, whilst maintaining excellent value for money.

Supplier's Notes:

A synthesizer like no other, MicroFreak is a peculiar, exceptional instrument that rewards the curious musician. It blends wavetable and digital oscillators with analogue filters. It features a unique poly-aftertouch flat keyboard. It adds controlled randomness to sequences. This isn't a revolution, it's a mutiny.

This out-there little music machine features a versatile digital oscillator so you can create rare and interesting sounds with ease. Modes like Texturer, KarplusStrong, Harmonic OSC, and Superwave give adventurous musicians the chance to explore totally new, unheard possibilities. Like having dozens of synths in just one instrument, both wild-eyed newcomers and seasoned professionals will fall in love with MicroFreak's flexible, powerful synth engine.

Physical modelling, wavetable synthesis, virtual analogue, there is nothing as complete and exciting as the MicroFreak oscillator on the market. It's hard to believe from such a small synth, but here it is, ready for you to explore. Excite your creativity and reward your curiosity with a large, diverse sound palette. MicroFreak features 11 awesome oscillators, 4 bespoke Arturia engines, and 7 modes from our friends at Mutable Instruments.

Inspired by the trailblazing 12-dB Oberheim SEM filter, you can make MicroFreak's filter scream or whisper to taste. The filter is state-variable, and can even auto-oscillate! You can use this is any way you like, from taking the edge of the razor-sharp wavetable sounds, or automating the cut-off by modulating it with keyboard pressure or the in-built sequencer.

Record up to four automations, edit notes per step or use the innovative Spice and Dice sequencer functions to find happy accidents. Add randomization to create evolving, original patterns, and virtually rewire and reconfigure its signal chain and controls with the 5x7 modulation matrix.

Notes: MicroFreak Stellar is a hybrid synthesizer that combines digital oscillators, analogue filters, quirky modulation, a uniquely flat PCB keybed, and expressive sequencing with a subtly out-of-this-world aesthetic design.

Interplanetary synth explorer

Discover the same loveable hybrid beast that sent the synth world into a spin, but primed for launch and ready for an interplanetary sonic voyage. MicroFreak Stellar features the same inspiring, bonkers sound but embellished with a unique space-age design.

Digital, wavetable, sampling, granular...

Treat yourself to only the weirdest & most wonderful paraphonic synth sounds with MicroFreak's multimode sound engine. Choose from numerous algorithms, including Wavetable, Chord, 4 new Sample & Granular engines and many more, and immediately customize your patches with 4 intuitive con-trols and real-time visual feedback.

Multi-mode analogue filter

Unlock truly unique hybrid tones by combining MicroFreak's digital sound engines with a crunchy resonant analogue filter, inspired by the classic Oberheim SEM. With low-pass, band-pass, and high-pass modes, you can make this 'Freak whisper, scream, or launch into self-oscillating orbit.

Modulation matrix

Quickly rewire MicroFreak's architecture and delve deep into complex sound design with its modulation matrix, offering up to 7 simultaneous destinations and 5 sources, including an ADSR envelope, cycling envelope, and 6-shape LFO.

Sequencing & randomization

Blur the lines between sequencing & arpeggiation and create spontaneous melodies, motifs, and rhythmic patterns on the fly. MicroFreak encourages musical exploration, expression, and evolution with its unique Spice & Dice randomization feature, ribbon controller, and 4 lanes of automation.

A unique keybed

Change the way you play and unlock fresh musical expression with MicroFreak's distinct PCB keyboard. It's flat, it's fast, and it's fit for everything from lightning-fast solos to instant arp creation; not only is it pressure sensitive, but it offers poly-aftertouch too!

What's in the box

Box content

MicroFreak Unit
Universal PSU
Registration card
2x MIDI port adapters

Instrument dimensions

Size : 12.2 x 9.2 x 2.2 inches (311 x 233 x 55mm)
Weight : 2.3 lbs. (1.02 Kg)

Notes: Another stylish offering from Arturia's Noir range, the MiniBrute 2 gets a black paint job and retains its hugely powerful semi-modular analogue sound. Still great value for money.

Supplier's Notes:
Arturia's revolutionary analog monosynth reborn for the modular age; the MiniBrute 2 Noir Edition is a thrilling, adaptable synthesizer that can't wait to meet your other instruments. Combining huge analog tone, powerful sound shaping features, step-sequencer, arpeggiator, a modular patch bay, and a stealthy black finish, MiniBrute 2 Noir represents the darker side of analog.

Hands-on synth joy

Intuitive, accessible, and fun; the pure synthesis power of MiniBrute 2 is easy to understand, quick to master, and will provide endless enjoyment. With instant, hands-on control of every parameter, you can mix your oscillators, ride your filters, sync your LFOs, and control your envelopes. MiniBrute 2 is a synth that gives you the freedom to create the sounds from your imagination.

Discover the modular world

Now you're able to make a music system that's truly more than the sum of its parts. MiniBrute 2 features a comprehensive modulation matrix with dozens of sources and destinations at your disposal. Whether you want to experiment with its internal parameters, wire in your modular setup, or sync your other gear to its sequencer, the possibilities are endless.

Performance power

Sporting the same luxurious, smooth-action keyboard as the venerable MatrixBrute, you'll never want to stop playing on this inspiring synth. The keyboard also features aftertouch, which can be routed through the modulation matrix, opening up massive performance possibilities. MiniBrute 2 also features an arpeggiator with multiple modes, tap tempo, and rock-solid sync, and an intuitive step-sequencer to give you as much creative freedom as possible.

The Brute Noir Editions

Unique analog instruments, where vintage synthesis and cutting-edge technology collides in the name of creative freedom and controlled sonic chaos, decorated with stealthy black exteriors. These are the Brute Noir Editions, the darker side of analog.

Included Software:
Arturia MIDI Control Center

Notes: Synth meets sequencer in this limited-edition Noir version of Arturia's excellent MiniBrute. Semi-modular design and extensive patch bay offer a wide variety of sound design options.

Supplier's Notes:
The MiniBrute 2S Noir Edition is a thrilling hybrid synthesizer enhanced for the modern musician. Combining raw analog power, an intuitive triple-layered step sequencer, a modular-worthy patch bay, and a stealthy black exterior, MiniBrute 2S Noir delivers the Brute Factor, and then some.

Pure synth power

A powerful standalone instrument, MiniBrute 2S Noir has massive synth potential that's intuitive, accessible, and fun to use. Whether you're a seasoned pro or new to the world of synthesis, you'll find its layout easy to understand, quick to master, and hugely inspiring. Thanks to its analog semi-modular architecture, you have hands-on control of every parameter, so you can sculpt your oscillators, sweep your filters, sync your LFOs, and control your envelopes on the fly to create a sound that's uniquely yours, bound only by your imagination.

Discover the modular world

Open up exciting new possibilities by rerouting MiniBrute 2S' signal with the modular patch bay. Better still, patch it to your existing Eurorack system and explore new connections, then sequence and shape with MiniBrute 2S' myriad of controls. With this synth at your command, your creative workspace will become a experimental sound laboratory.

Step in line

Featuring an awesomely powerful, triple layered step-sequencer, multi-mode arpeggiator, and high-quality performance pads, MiniBrute 2S Noir perfectly suits adventurous electronic musicians who want to take their creations further than ever before.

The Brute Noir Editions

Unique analog instruments, where vintage synthesis and cutting-edge technology collides in the name of creative freedom and controlled sonic chaos, decorated with stealthy black exteriors. These are the Brute Noir Editions, the darker side of analog.

Included Software:
Arturia MIDI Control Center

Notes: Premium synth action from Arturia. Six-voice analogue design with all the bells and whistles: dual filter section, modulation matrix, sequencer, effects and unique Morphee expression controller.

*** Firmware update - December 2021 ***

New Effects

Add an additional final EQ stage with 7 shapes to choose from, plus a vintage-style Ensemble effect for massive stereo width.

Synth Accuracy

You can now adjust the accuracy of controls like OSC pulse width, filter settings, unquantized LFO rate and more for a humanized feel.

Chord Mode

Simply hold 'Polyphony' and play up to 6 notes to set your chord voicing, allowing you to play chords with a single note on the keyboard.

Duophonic Aftertouch

Configure Aftertouch to only apply to the last note or group of notes you press, leaving previously held notes unchanged.

LFO 3 Curve Enhancements

Set PolyBrute's third LFO curve to respond differently for further modulation control within your patch - rise or fall, exponential or logarithmic.

Real-time Display Feedback

PolyBrute's screen now displays parameter names and values in real-time, so you can stay on top of every little sonic tweak.

Expanded preset library

Explore 64 additional factory presets designed by world-class sound designers, expanding PolyBrute's sonic vocabulary.

Supplier's Notes:
Imagine using 6 analog voices to craft a sound that's powerful, raw, and entirely yours. Imagine a sound existing in two states simultaneously in a single preset, with seamless morphing between them. Imagine multi-axis performance controls offering next-generation musical expression. Imagine instant and limitless modulation at your fingertips. Imagine a polysynth made by musicians, for musicians.

Raw, powerful, organic. The analog Brute voice is an unmistakable sonic force to be reckoned with - how about six at once?

PolyBrute's six-voice power starts with two Brute waveshaping oscillators. With sprawling timbral versatility from delicate airy pads to snarling stacked bass, these are six voices you can count on to excel in every application.

The tactile and reactive nature of analog synthesis is right at the heart of PolyBrute's architecture. Tame or animate the oscillators with an expanded array of multiple filters, envelopes and LFOs for absolute control over the analog domain. Once you've harnessed its sound sources, PolyBrute is your vessel for an inspiring voyage into sound.

PolyBrute's morphing abilities let you perform, compose, and explore sound without boundaries.

Imagine being able to sweep all the parameter settings between two different patches all at once. PolyBrute goes even further with its groundbreaking ability to gradually morph between two completely different states within any patch.

For morphing to work, hands-on control is essential - PolyBrutes takes it to another level. The all-new Morphee three-dimensional performance touchpad ensures that intricate morphing expression is always right at your fingertips. Manipulate any facet of PolyBrute's sound, from delicate morphing to extreme dynamic shifts, across the X, Y and Z axis in an instant.

It doesn't end there; PolyBrute is armed to the teeth with articulate controllers to give your performances and compositions the elusive human touch.

This unparalleled sonic flexibility and expressivity is what earns PolyBrute its place in synthesizer history - a trailblazer of creativity.

The Matrix- the digital brain for PolyBrute's analog heart. The Matrix is where PolyBrute's analog reactivity and digital precision collide - an advanced architecture unlike any synth before it.

PolyBrute puts all that analog power right up front with dedicated knobs and switches, offering unmatched control and immediacy.

Almost everything you touch also generates MIDI, so you can capture your every move as part of your DAW productions. Need some instant attitude? Crank up the enhanced Steiner filter's Brute Factor. Want to change the cutoff on both filters at once? Grab the Master Cutoff knob. Time to move the floor beneath your feet? Dial in VCO 2's sub-oscillator. It's all right there in front of you.

Library management, parameter editing, and instant integration with your DAW..

Analog Morphing Synthesizer:
6 voices of Polyphony
Mono, Unison, Poly voicing
Single, Split, Layer modes

Two Analog VCOs:
Saw
Triangle + Metalizer
Square + Pulse Width
Sub
Linear FM
Hard Sync

Three LFOs:
LFO1 and LFO2 with waveform selection
LFO3 with waveform shaping using Shape and Symmetry
Rate control & Tempo Sync
Various retrig options

Three stereo digital effects:
Modulation FX : Chorus, Phaser, Flanger, Ring Modulation, ...
Delay : 9 algorithms including BBD, Digital delay, ...
Reverb : 9 algorithms including Hall, Plate, Spring, Shimmer,

Box contents:
PolyBrute unit
Power cable

Instrument size : 38.3 x 14.9 x 4.4 inches (972 x 378 x 110mm)
Instrument weight : 44 lbs. (20 Kg)

Notes: Limited-edition murdered-out Noir version of Arturia's mega PolyBrute, with expressive multi-axis Morphee controller and Morph knob to blend between patches.

Supplier's Notes:
PolyBrute Noir is a 61-note polyphonic analogue keyboard, uniting unparalleled expressivity and sound design flexibility with 6 fearsome Brute voices, complete with a limited-edition stealthy black finish. The result is an instrument that lets musicians perform fearlessly, compose with fluidity, and explore sound in perpetual motion.

Limited Noir Edition

A true dark horse in any setup, PolyBrute Noir stylishly conceals its enormous creative potential within a slick black exterior, complete with colorful accents, luxurious dark wooden appointments, and signature ionized parts that'll make anyone look twice.

Massive analogue polyphony

Harness the raw power of analogue with 6 powerful analogue Brute voices, comprising seamless waveshaping VCOS, dual filters, and a tactile array of modulation. Split, layer, and stack PolyBrute's voices for every flavor of analogue polyphony - from beauty to beast.

Morphing: sounds within sounds

Explore sound between the lines with 2 distinct sonic states within each preset, yours to seamlessly morph and navigate between. With a single sweep of the multi-axis Morphee controller and Morph knob, discover endless sweet spots in every patch.

Perform, express

Freely express your musical style and bring your creative ideas to life with PolyBrute's hands-on controls, flexible interface, and premium velocity-sensitive keybed with aftertouch. From the Morphee to the responsive ribbon controller, every aspect of PolyBrute ensures that your sound is an extension of yourself.

Your sound to infinity

Built to satisfy your inner sound explorer, this polysynth comes fully equipped for perpetual patch discovery and sound design. Quickly create modulation connections with the Matrix, color your patch with 3 digital stereo FX engines, and instantly animate any idea with musical sequencing and effortless arpeggiation.

Included Software:

PolyBrute Connect

Arturia MIDI Control Center

Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


Limited-edition murdered-out Noir version of Arturia's mega PolyBrute, with expressive multi-axis Morphee controller and Morph knob to blend between patches.

Supplier's Notes:
PolyBrute Noir is a 61-note polyphonic analogue keyboard, uniting unparalleled expressivity and sound design flexibility with 6 fearsome Brute voices, complete with a limited-edition stealthy black finish. The result is an instrument that lets musicians perform fearlessly, compose with fluidity, and explore sound in perpetual motion.

Limited Noir Edition

A true dark horse in any setup, PolyBrute Noir stylishly conceals its enormous creative potential within a slick black exterior, complete with colorful accents, luxurious dark wooden appointments, and signature ionized parts that'll make anyone look twice.

Massive analogue polyphony

Harness the raw power of analogue with 6 powerful analogue Brute voices, comprising seamless waveshaping VCOS, dual filters, and a tactile array of modulation. Split, layer, and stack PolyBrute's voices for every flavor of analogue polyphony - from beauty to beast.

Morphing: sounds within sounds

Explore sound between the lines with 2 distinct sonic states within each preset, yours to seamlessly morph and navigate between. With a single sweep of the multi-axis Morphee controller and Morph knob, discover endless sweet spots in every patch.

Perform, express

Freely express your musical style and bring your creative ideas to life with PolyBrute's hands-on controls, flexible interface, and premium velocity-sensitive keybed with aftertouch. From the Morphee to the responsive ribbon controller, every aspect of PolyBrute ensures that your sound is an extension of yourself.

Your sound to infinity

Built to satisfy your inner sound explorer, this polysynth comes fully equipped for perpetual patch discovery and sound design. Quickly create modulation connections with the Matrix, color your patch with 3 digital stereo FX engines, and instantly animate any idea with musical sequencing and effortless arpeggiation.

Included Software:

PolyBrute Connect

Arturia MIDI Control Center

Notes: The top dog of the Hydrasynth range, featuring a dual synth engine offering 16 voices (double the standard model) and a larger six-octave keyboard. Serious synth power with great wavetable sound.

*** New 2.0 Firmware update for all Hydrasynth models - March 2023 ***

This is a free of charge update for all current and new users of Hydrasynth. The biggest news in this update includes:
Expanded memory to 8 banks (Keyboard, Desktop, and Explorer only)
NEW modulation source: VOICE MODULATOR
OSC Bit reducer
LFO quantizer
ENV quantizer
LFO Step Advance
Global FX bypass
Increased Vibrato resolution
New Sustain pedal options including Sostenuto
More LED options
Glissando in glide options
Arp Range goes to 6 octaves
Arp Step Offset parameter
More Rand/Init shortcuts (all STEP LFO steps, Wavescan waves, Voice mod offsets)
Local On/Off saved
......And more!
This is the first major update to the Hydrasynth family in a little, which adds a tonne of new features.


Supplier's Notes:
The ASM Hydrasynth Deluxe is the new flagship Hydrasynth. Offering a dual-engine setup with a total of 16 voices plus an all new 73-note keybed featuring ASM's much sought after PolyTouchr polyphonic aftertouch functionality, clearly in a class of its own. With essentially two Hydrasynths in one instrument, KeySplit and Dual voice mode patches with 8 independent voices each are possible. You also have separate balanced stereo audio outputs for each of the two parts. The easily accessible 4 octave ribbon controller adds for truly expressive playing. The Hydrasynth Deluxe of course offers CV/GATE I/O for interfacing to modular and other voltage controlled synths. There's a ton of potential for sound creation, using ASM's WaveScan oscillators together with the Mutator waveshaping section and user configurable filters. A plethora of LFO's and Envelope's plus Insert and Master Effects makes this a dream sound creation tool and quite possibly the ultimate synthesizer and controller combo for your rig.

Tech Specs

Type: Polyphonic Wave Morphing Synthesizer
Sound Engine Type(s): Wavescan
Analog/Digital: Digital
Number of Keys: 73
Type of Keys: ASM POLYTOUCH Polyphonic Aftertouch Keyboard, On/Off Velocity-sensitive
Other Controllers: Ribbon Controller, Pitch Bend, Mod Wheel
Polyphony: 16 voices (Full/Layer/Split)
Number of Presets: 1024 Single Programs, 1280 Programs in Multi (Upper/Lower)
Number of Multis: 640 Programs
Oscillators: 3 x Wavescan oscillators (219 Waveforms), 4 x Mutator wave shapers (8 Types), Noise (7 Types)
Mutators: 8 Types (FM-Lin, WaveStack, PW-Orig, PW-Squeeze, PW-ASM, Harmonic Sweep, Hard Sync, PhazDiff)
Noise: 7 Types (White, Pink, Brown, Red, Blue, Violet, Grey)
LFO: 5 per Voice (Sine, Triangle, Saw Up, Saw Down, Square, Pulse27%, Pulse13%, S&H, Noise, Random, Step), Tempo syncable, Semitone Lock
Envelopes: 5 per voice, Tempo syncable, Variable trigger sources
Filter Types: 1 Multimode Filter (16 types) and 1 Variable LP-BP/Notch-HP filter, series or parallel routing
Filters: Filter 1 (LP Ldr12, LP Ldr24, LP Fat12, LP Fat24, LP Gate, LP MS20, HP MS20, LP 3-Ler, BP 3-Ler, HP 3-Ler, LP Stn12, BP Stn12, HP Stn12, LP 1 Pole, LP 8 Pole, Vowel), Filter 2 (LP-BP-HP, LP-Notch-HP)
Effects: 9 Insert Effects, 5 Delays, 4 Reverbs
Effects Types: Chorus, Flanger, Rotary, Phaser, Lo-Fi, Tremolo, EQ, Compressor, Distortion, Delay, Reverb
Arpeggiator: 8 types (Up, Down, Up&Down, Up/Down, Order, Random, Chord, Phrase)
Other: Mod Matrix (32 slots), Macro Controllers (8), Favorites (32), Randomizer (Patch and Module), MPE Compatibility, Warm Mode, Microtuning
Audio Outputs: 4 x 1/4" Balanced (L/Mono Upper, R Upper, L Lower, R Lower)
Headphones: 1 x 1/4", 1 x 1/8", Separate volume control
USB: 1 x Type B
MIDI I/O: In/Out/Thru
Pedal Inputs: 2 x 1/4" (expression, sustain)
Other I/O: 2 x 1/8" Inputs (Mod 1, Mod2), 5 x 1/8" Outputs (CV, Gate, Mod1, Mod2, Clock)
Power Supply: 12V DC switchable power supply
Additional: Utility shelf
Height: 3.62" / 9.2cm
Width: 44.45" / 112.9cm
Depth: 13.62" / 34.6cm
Weight: 29.33lbs / 13.3kg
MPN: HSLX

Notes: A smaller, more affordable version of the excellent Hydrasynth Keyboard. Advanced wavetable synthesis with 8-voice polyphony, hands-on control and an excellent keybed with polyphonic aftertouch.

*** New 2.0 Firmware update for all Hydrasynth models - March 2023 ***

This is a free of charge update for all current and new users of Hydrasynth. The biggest news in this update includes:
Expanded memory to 8 banks (Keyboard, Desktop, and Explorer only)
NEW modulation source: VOICE MODULATOR
OSC Bit reducer
LFO quantizer
ENV quantizer
LFO Step Advance
Global FX bypass
Increased Vibrato resolution
New Sustain pedal options including Sostenuto
More LED options
Glissando in glide options
Arp Range goes to 6 octaves
Arp Step Offset parameter
More Rand/Init shortcuts (all STEP LFO steps, Wavescan waves, Voice mod offsets)
Local On/Off saved
......And more!
This is the first major update to the Hydrasynth family in a little, which adds a tonne of new features.


Supplier's Notes:
The ASM Hydrasynth Explorer takes the now legendary Hydrasynth into new territories. The Hydrasynth Explorer offers the same 8-voice sound engine as the Hydrasynth Keyboard and Desktop, but in a compact and portable battery powered form factor. The 37-note mid-sized PolyTouchr keybed features polyphonic aftertouch, offering great playability and expression but in a reduced footprint. The extremely deep yet easy to use sound engine features the famous WaveScan oscillators, Mutator waveshaping, flexible dual Filter section, 32-slot modulation matrix, and dual Insert and dual Master effects allowing a lifetime of sonic explorations. The CV/GATE outputs provides for easy integration with equipment such as modular synthesizers and the USB MIDI and full-sized MIDI DIN connectors takes care of standard connectivity without the need for special cables. The ASM Hydrasynth Explorer can also be powered by 8xAA batteries for true on-the-go mobile operation. Simply put, this is one very powerful compact-sized synthesizer and controller all-in-one for the modern musician.

Tech Specs

Type: Polyphonic Wave Morphing Synthesizer
Sound Engine Type(s): Wavescan
Analog/Digital: Digital
Number of Keys: 37 mid-sized keys
Type of Keys:ASM POLYTOUCH Polyphonic Aftertouch Keyboard, On/Off Velocity-sensitive
Other Controllers: Pitch Bend, Mod Wheel
Polyphony: 8 voices
Number of Presets: 640
Oscillators: 3 x Wavescan oscillators (219 Waveforms), 4 x Mutator wave shapers (8 Types), Noise (7 Types)
Mutators: 8 Types (FM-Lin, WaveStack, PW-Orig, PW-Squeeze, PW-ASM, Harmonic Sweep, Hard Sync, PhazDiff)
Noise: 7 Types (White, Pink, Brown, Red, Blue, Violet, Grey)
LFO: 5 per Voice (Sine, Triangle, Saw Up, Saw Down, Square, Pulse27%, Pulse13%, S&H, Noise, Random, Step), Tempo syncable, Semitone Lock
Envelopes: 5 per voice, Tempo syncable, Variable trigger sources
Filter Types: 1 Multimode Filter (16 types) and 1 Variable LP-BP/Notch-HP filter, series or parallel routing
Filters: Filter 1 (LP Ldr12, LP Ldr24, LP Fat12, LP Fat24, LP Gate, LP MS20, HP MS20, LP 3-Ler, BP 3-Ler, HP 3-Ler, LP Stn12, BP Stn12, HP Stn12, LP 1 Pole, LP 8 Pole, Vowel), Filter 2 (LP-BP-HP, LP-Notch-HP)
Effects: 9 Insert Effects, 5 Delays, 4 Reverbs.
Effects Types: Chorus, Flanger, Rotary, Phaser, Lo-Fi, Tremolo, EQ, Compressor, Distortion, Delay, Reverb
Arpeggiator: 8 types (Up, Down, Up&Down, Up/Down, Order, Random, Chord, Phrase)
Other: Mod Matrix (32 slots), Macro Controllers (8), Favorites (32), Randomizer (Patch and Module), MPE Compatibility, Warm Mode, Microtuning
Audio Outputs: 2 x 1/4" Balanced (L/Mono, R)
Headphones: 1 x 1/4"
USB: 1 x Type B
MIDI I/O: In/Out
Pedal Inputs: 1 x 1/4" (sustain)
Other Outputs: 5 x 1/8" Outputs (CV, Gate, Mod1, Mod2, Clock)
Power Supply: 12V DC switchable power supply
Height: 2.28" / 5.8cm
Width: 21.81" / 55.4cm
Depth: 9.72" / 24.7cm
Weight: 7.63lbs / 3.46kg
MPN: HSMK

Notes: Somewhere between an analogue drum synth and a dub siren, the DS71 is a uniquely creative little box. Properly versatile, experimental stuff.

Supplier's Notes:
The DS71 is a synthesizer designed to easily create many different dub siren tones at your fingertips. It combines analog synth voicing circuitry with a powerful digital LFO that allows for quick access to different sounds at the press of a button. Inspired by the classic analog drum-synth modules and re-interpreted as dub siren.

Audio output: impedance balanced 1/4" TRS Jack

Trigger input: impedance balanced 1/4" TRS Jack

DC Input: 12VDC, 500mA, centre positive, 2.1mm x 5,5mm barrel type connector

Dimensions: 145mm x 130mm x 60mm

12VDC 1A power supply included.

Notes: ISE-NIN (pronounced ee-seh-nin) features eight voices, each consisting of 100% analogue voltage controlled oscillators, analog lowpass and highpass filter, noise generator, two ADSR envelopes and a VCA. 2 different presets can be layered, making richer sounds, but limiting voices amount to 4 per layer. Each layer has its own fully assignable velocity and poly-aftertouch controls and global MPE settings.

Furthermore the synth offers full MIDI/USB control and the ability to store 128 presets per bank across 10 banks. Sophisticated microtuning with a support of ODDSound MTS-ESP and a signature arpeggiator integrates this classic synth concept seamlessly into the future of your modern studio needs.

Notes: Updated version of Black Corp's analogue monster. Dual-oscillator design with eight-voice polyphony, full MPE support, stereo analogue chorus and a glorious multi-mode filter.

Supplier's Notes:
XERXES delivers an unmatchable level of warmth through its two digitally controlled analogue oscillators. A multimode analogue filter, white and pink noise generator, 2 ADSR envelopes, 2 sync-able LFOs, unique analogue BBD chorus with 3 modes, full MPE-based polyphonic aftertouch, and complete MIDI control including polyphonic aftertouch and MPE work together to bring a classic analogue sound ready to integrate into modern times. MK2 features an updated VCA section, balanced outputs and high quality audio via USB conversion.

Xerxes produces triangle, saw, square, and PWM waveforms with variable drift controls from each oscillator, sync with variable phase shifting, and ring modulation allowing for complex cross-modulation effects. Each oscillator features an octave switch, bipolar transpose potentiometer +/-7 semitones, a master tuning pot affecting both oscillators, and a detune knob for subtly detuning Oscillator 2 to Oscillator 1. Portamento/Glissando or Glide can be programmed to affect Oscillator 1, 2, or both.

The analogue multimode filter on XERXES offers 24db/oct low pass, 12db/oct high pass modes and a band pass filter mode switchable between 6db/oct & 12db/oct for all kinds of filter characteristics. The filter can also be modulated by the dedicated ADSR envelope, LFO, velocity, and aftertouch (MPE and Polyphonic Aftertouch) allowing for incredibly expressive performance and programming.

XERXES features 6 LFO waveforms: Sine, triangle, saw, ramp, square, and random, plus a dedicated delay control to fade the LFO to the full amount set by the depth knob. Two LFOs are selectable with an A/B switch, each of which can be used to control multiple parameters set by the button switches to control oscillator tuning (A/B/Both) filter cutoff, and amplifier levels (VCF/VCA/Both.) Each of these LFOs also includes a Sync on/off switch.

XERXES features a beautiful, fully-analogue BBD-based chorus with 3 selectable modes, similar to the chorus effect found on the vintage Elka Synthex synthesizer. XERXES MK2 is equipped with stereo 1/4" balanced outputs to take full advantage of the stereo chorusing effect.

Finally, XERXES features full MIDI control and ability to store 128 user presets per bank across 11 banks (Factory, Vintage and 9 user banks) integrating this classic synth concept seamlessly into any studio setup.

Main features:

8-voice polyphonic analogue synthesizer
2 discrete logic DCOs per voice
analogue HP/BP/LP filter
2 LFOs
2 ADSRs
polyphonic velocity and aftertouch
full MPE (MIDI polyphonic expression) support
analogue BBD stereo chorus
4U rack size with detachable rack ears and wood side panels
10 preset banks (x128)

New in Version 2: Updated VCA section, balanced outputs and high quality audio via USB conversion using high resolution DACs.

Notes: Latest incarnation of Buchla's legendary modular synth. Massively creative with incredible sound and history stretching all the way back to the 1960s.

Supplier notes:
The evolution of the legendary modular analog synthesizer by Don Buchla. The Buchla Easel Command is the newly updated 208C in a standalone desktop form with MIDI and CV control.

Buchla's own Joel Davel led the charge to create a new version of the legendary Music Easel instrument with more modular flexibility and independence, while also providing the means to easily interface with more devices, such as the various DAWs like Ableton and MIDI controllers, including the very expressive Sensel Morph. It's still fully analog in its default configuration and provides the unique and exquisite Buchla experience with greater functionality at a lower cost.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Latest incarnation of Buchla's legendary modular synth. Massively creative with incredible sound and history stretching all the way back to the 1960s.

Supplier notes:
The evolution of the legendary modular analog synthesizer by Don Buchla. The Buchla Easel Command is the newly updated 208C in a standalone desktop form with MIDI and CV control.

Buchla's own Joel Davel led the charge to create a new version of the legendary Music Easel instrument with more modular flexibility and independence, while also providing the means to easily interface with more devices, such as the various DAWs like Ableton and MIDI controllers, including the very expressive Sensel Morph. It's still fully analog in its default configuration and provides the unique and exquisite Buchla experience with greater functionality at a lower cost.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Amazing value from this little Eurorack-compatible analogue synth. Loosely Moog-inspired semi-modular East Coast subtractive design with MIDI control and great sound.

Supplier's Notes:
East Beast

Fully analogue East Coast style semi-modular synthesizer

What's the first thing you think of when you hear the word "synthesiser"? Close your eyes and think about.

Anyway, for a lot of people, the word synthesiser invokes visions of big filter cutoff knobs, envelope generators, and importantly, big fat-sounding voltage-controlled oscillators. These are the hallmarks of East Coast-style synthesis.

East Beast is a fresh take on these old-school concepts with a few beastly twists thrown in here and there.

Furthermore, you can pop East Beast out of its included enclosure and it transforms right into a 40HP eurorack module
East Beast's oscillator, designed in partnership with Pittsburgh Modular Synthesizers, is a part of their 5th generation of analogue oscillators stemming from a super-serious 10 years of continued research into analogue oscillator development.

Its circuitry is not a clone or based on any outside designs. It is made with 100% modern components. This keeps it very stable, and giving it a super rich, and unique sound.

Most of the filters you are used to hearing are transistor ladder filters or copies of transistor ladder filters. East Beast's filter is not one of those. Pittsburgh's whole goal of making this filter for East Beast was to create a filter that's creamy smooth with no dead spots, a very common phenomenon in all filters, but check it out. This one's got no dead spots. From nasally to biting and elsewhere, it's all one large sweet spot.

East Beast's filter is a multi-mode filter, meaning it can be used as a low pass filter, high pass filter, bandpass filter, or a combination of the three for an even wider sonic palate.
Shape the beast in your own image
To further sculpt the sounds Cre8audio has included an envelope generator & LFO. The custom envelope circuit creates a snappy, percussive attack for expressive performance. The dual range LFO opens up a wide range of LFO and audio rate modulation possibilities.

Get patched.
Semi-modular means that the East Beast will work without any patch cables or anything. But what fun is that? Who doesn't want to have their own personal spaghetti mess of cables sticking out of their synthesizer to get wacky with?
East Beast has basically 9 different patchable modules (Oscillator, filter, envelope, VCA, LFO, multi-mod tool, sequencer, MIDI to CV converter, and button keyboard) with a whopping 18 Eurorack compatible patch points to plug into itself and your other gear. All for your patching pleasure.

As well as this, East Beast has MIDI in and a fancy MIDI thru so you can chain multiple MIDI monstrosities together- you can plug in a MIDI controller into East Beast and do as you wish.

But wait, there's more! East Beast includes quite a few additional performance features. You can dive in and dive in with its built-in tap tempo clock, arpeggiator, and sequencer. There's a lot of opportunities to inject in some randomness too.

Specifications for when used as a eurorack module

Width when used as a module = 40hp
Depth when used as a module = 25mm
213mA power draw when running +12V rail
151mA power draw when running -12V

Input voltage range of oscillator = 0-10V

Included in the box - 1x East Beast, 1x East Beast wall-wart power supply, 5x Amazing Nazca Noodles Patch Cables, 1x 3.5mm to 5 pin MIDI Din pigtail, and love (love's presence likely, but not guaranteed)

Notes: ***B-STOCK: Box opened, product in perfect working order***


Amazing value from this little Eurorack-compatible analogue synth. Loosely Moog-inspired semi-modular East Coast subtractive design with MIDI control and great sound.

Supplier's Notes:
East Beast

Fully analogue East Coast style semi-modular synthesizer

What's the first thing you think of when you hear the word "synthesiser"? Close your eyes and think about.

Anyway, for a lot of people, the word synthesiser invokes visions of big filter cutoff knobs, envelope generators, and importantly, big fat-sounding voltage-controlled oscillators. These are the hallmarks of East Coast-style synthesis.

East Beast is a fresh take on these old-school concepts with a few beastly twists thrown in here and there.

Furthermore, you can pop East Beast out of its included enclosure and it transforms right into a 40HP eurorack module
East Beast's oscillator, designed in partnership with Pittsburgh Modular Synthesizers, is a part of their 5th generation of analogue oscillators stemming from a super-serious 10 years of continued research into analogue oscillator development.

Its circuitry is not a clone or based on any outside designs. It is made with 100% modern components. This keeps it very stable, and giving it a super rich, and unique sound.

Most of the filters you are used to hearing are transistor ladder filters or copies of transistor ladder filters. East Beast's filter is not one of those. Pittsburgh's whole goal of making this filter for East Beast was to create a filter that's creamy smooth with no dead spots, a very common phenomenon in all filters, but check it out. This one's got no dead spots. From nasally to biting and elsewhere, it's all one large sweet spot.

East Beast's filter is a multi-mode filter, meaning it can be used as a low pass filter, high pass filter, bandpass filter, or a combination of the three for an even wider sonic palate.
Shape the beast in your own image
To further sculpt the sounds Cre8audio has included an envelope generator & LFO. The custom envelope circuit creates a snappy, percussive attack for expressive performance. The dual range LFO opens up a wide range of LFO and audio rate modulation possibilities.

Get patched.
Semi-modular means that the East Beast will work without any patch cables or anything. But what fun is that? Who doesn't want to have their own personal spaghetti mess of cables sticking out of their synthesizer to get wacky with?
East Beast has basically 9 different patchable modules (Oscillator, filter, envelope, VCA, LFO, multi-mod tool, sequencer, MIDI to CV converter, and button keyboard) with a whopping 18 Eurorack compatible patch points to plug into itself and your other gear. All for your patching pleasure.

As well as this, East Beast has MIDI in and a fancy MIDI thru so you can chain multiple MIDI monstrosities together- you can plug in a MIDI controller into East Beast and do as you wish.

But wait, there's more! East Beast includes quite a few additional performance features. You can dive in and dive in with its built-in tap tempo clock, arpeggiator, and sequencer. There's a lot of opportunities to inject in some randomness too.

Specifications for when used as a eurorack module

Width when used as a module = 40hp
Depth when used as a module = 25mm
213mA power draw when running +12V rail
151mA power draw when running -12V

Input voltage range of oscillator = 0-10V

Included in the box - 1x East Beast, 1x East Beast wall-wart power supply, 5x Amazing Nazca Noodles Patch Cables, 1x 3.5mm to 5 pin MIDI Din pigtail, and love (love's presence likely, but not guaranteed)

Notes: Unreal value from Cre8audio's West Pest, the more experimental sibling to the East Beast. Loosely Buchla-inspired semi-modular synthesis with built-in sequencer, MIDI control and full Eurorack compatibility.

Supplier's Notes:
West Pest

Fully analogue West Coast style semi-modular synthesizer

The cousin of Cres8audio's East Beast desktop synthesizer, West Pest is a pesty cornucopia of simple complexity.

West Coast style is typically characterized by additive derived, rich and complex sounds. Often, more traditional user interface elements are replaced by the abstract and experimental.

All that said, West Pest is actually not a deep dive into the abstract. It provides a wide array of sonic capabilities while maintaining a quick and easy workflow. You'll make fresh & inspiring sounds in a flash. West Pest's huge sonic capabilities emanate from its modest bento box-sized exterior.

You can also feel free to pop West Pest out of its enclosure and transform it right into a 40HP eurorack module, or keep it in its case and use it anywhere for your West Coast style pleasure.

West Beast's oscillator, designed in partnership with Pittsburgh Modular Synthesizers, stems from 10 long years of stoic commitment to a continuous development of analogue oscillator research and development.

Its beautiful buzzy circuitry is not a clone or based on any outside designs. It is made with 100% modern components. This keeps it very stable, and giving it a super rich, and unique sound.

Folding waves, space, time & laundry?

West Pest utilizes a custom wave folder to shape the sound. It adds additional dimensions to West Pest's already unique sounding oscillator core.

A wave folder shapes sounds differently than a filter. Instead of removing harmonics, the wave folder increases the harmonic content of the oscillator by folding the wave in on itself to create sonically rich waveforms.

West Pest's wave folder takes what traditional wave folding circuits have done for years and ups the ante, allowing the user to fold previously unfoldable waveforms.

In addition to being able to send all of West Pest's waveforms through its wave folder/shaper, you can also input external sound sources. So go ahead, get weird with it.

Sculpt west-coast style

In continuity with the whole West Coast synth vibe, West Pest has a dynamics controller as well as an LFO to further sculpt its sound.

The Dynamics Controller combines the functionality of a VCA with a low pass filter to imitate the behaviour of soundwaves in the real world by dynamically modifying the harmonic content with the volume of the sound.

Go patch yourself

Semi-modular means that the West Pest will work without any patch cables. But who doesn't want to build a magnificent web of patch cables flowing in and out of their synthesiser? Brewing up sounds the old fashion way like unwavering generations before you, one patch cable at a time is where the real magic happens.
West Pest provides access to basically 8 different modules (Oscillator, wave contour, dynamics controller, LFO, multi-mod tool, MIDI to CV converter, sequencer, and button keyboard) worth of functionality with a whopping 18 Eurorack compatible patch points to plug into itself and your other gear. Rewire West Pest's signal flow, or share your favourite elements from West Pest with any other compatible synthesisers and vice versa.

And furthermore, the West Pest has got MIDI in, and MIDI through. Connect to a DAW, controller, daisy chain, or not. West Pest has you covered, at least, MIDI-wise. There's really no better way to get West Pest integrated into a DAW environment or connect to a controller.
Get your performance on.

But wait, there's more! West Pest includes quite a few additional performance features. You can dive in with its built-in tap tempo clock, arpeggiator, and sequencer. There's a lot of opportunities to inject in some randomness too.

Specifications for when used as a eurorack module
Width when used as a module = 40hp
Depth = 25mm
250mA power draw when running +12V rail
190mA power draw when running -12V

Input voltage range of oscillator = 0-10V

Included in the box - 1x West Pest, 1x West Pest wall-wart power supply, 5x Amazing Nazca Noodles Patch Cables, 1x 3.5mm to 5 pin MIDI Din pigtails and pizzazz (pizzazz's presence not guaranteed)

Notes: If you ever wanted an audio-reactive video synthesizer, you have come to the right place!

There are three 'flavours' of video synth here: the classic Video Scope, the graphic Rhythm Scope, and the monochromatic Black & White Video Scope.

They operate the same way: connect an audio source such as a synth, electric guitar, groove box, vocals, etc., and instantly see your sound on a TV, projector, or capture device! The only difference is the style of visuals they create.

The Mode knob sets the visuals while the Gain knob fine tunes the incoming audio signal to suit the imagery.

Black & White Video Scope
Only two colours needed for these visuals!

It has best of oscilloscopes and beat sync modes! Looks great on its own or as a chroma/luminance key in a larger video synth setup.

Design/Specs
Physical characteristics:
Size: 3.73 x 2.95 x 1.81" / 9.47 x 7.49 x 4.6 cm. Length includes jack. Height includes knobs.
Weight: 3.2oz / 90g
Input/output:
Composite Video Out - NTSC Format Only
1/4" Stereo Audio Input
2.1mm Centre-positive barrel connector for power input
Included items:
Power Supply:
Input: 100-240VAC @ 50/60Hz. Output: 9VDC, 1.3A, Centre-positive polarity.

Black & white video scope:
Black PLA enclosure
16 Modes - including one Random Mode

Notes: ***B-STOCK: Box opened, product in perfect working order***


If you ever wanted an audio-reactive video synthesizer, you have come to the right place!

There are three 'flavours' of video synth here: the classic Video Scope, the graphic Rhythm Scope, and the monochromatic Black & White Video Scope.

They operate the same way: connect an audio source such as a synth, electric guitar, groove box, vocals, etc., and instantly see your sound on a TV, projector, or capture device! The only difference is the style of visuals they create.

The Mode knob sets the visuals while the Gain knob fine tunes the incoming audio signal to suit the imagery.

Black & White Video Scope
Only two colours needed for these visuals!

It has best of oscilloscopes and beat sync modes! Looks great on its own or as a chroma/luminance key in a larger video synth setup.

Design/Specs
Physical characteristics:
Size: 3.73 x 2.95 x 1.81" / 9.47 x 7.49 x 4.6 cm. Length includes jack. Height includes knobs.
Weight: 3.2oz / 90g
Input/output:
Composite Video Out - NTSC Format Only
1/4" Stereo Audio Input
2.1mm Centre-positive barrel connector for power input
Included items:
Power Supply:
Input: 100-240VAC @ 50/60Hz. Output: 9VDC, 1.3A, Centre-positive polarity.

Black & white video scope:
Black PLA enclosure
16 Modes - including one Random Mode

Notes: If you ever wanted an audio-reactive video synthesizer, you have come to the right place!

There are three 'flavours' of video synth here: the classic Video Scope, the graphic Rhythm Scope, and the monochromatic Black & White Video Scope.

They operate the same way: connect an audio source such as a synth, electric guitar, groove box, vocals, etc., and instantly see your sound on a TV, projector, or capture device! The only difference is the style of visuals they create.

The Mode knob sets the visuals while the Gain knob fine tunes the incoming audio signal to suit the imagery.

Rectilinear graphics line up with incoming rhythms and arpeggios. For easy 'newness' the Random mode will choose a new visual pattern after a user-determined number of beats.

Design/Specs

Physical characteristics:
Size: 3.73 x 2.95 x 1.81" / 9.47 x 7.49 x 4.6 cm. Length includes jack. Height includes knobs.
Weight: 3.2oz / 90g

Input/output:
Composite Video Out - NTSC Format Only
1/4" Stereo Audio Input
2.1mm Centre-positive barrel connector for power input

Included items:
Power Supply:
Input: 100-240VAC @ 50/60Hz. Output: 9VDC, 1.3A, Center-positive polarity.

Rhythm scope:
Purple PLA enclosure
16 Modes - including one Random Mode

Notes: OVUM is where you start: a standalone all-analogue tool for exploratory sound synthesis - all you need to start creating is headphones.

OVUM is designed for exploring pure tones, drones, and microtonal sound textures. Five independently controlled triangle-core oscillators give you five lush voices to layer and evolve. Each voice has a separate control for volume, pitch, and tone, and can be switched between a bright square wave and a crisp triangle wave.

OVUM is hand-built from 100% analog circuitry, with no digital components, screens, quantization, or key-combinations to memorize - everything is immediate and at your fingertips.

OVUM is enclosed in a beautiful and sturdy wood and aluminum case that feels as good in your hands as it looks on your tabletop.

OVUM has a USB-C port for power, and a single 3.5mm audio output jack for headphones or line-out to connect to an amplifier, audio interface, or effects.

To reduce waste, by default OVUM comes with just the instrument and a USB to USB-C power cable. If you don't have a spare USB power supply, they can be added to your purchase at checkout. OVUM is portable, but does not contain a battery. It can be powered by any USB powerbank.

Notes: Bass Bot is an intelligent sequencer featuring 21st century transistor technology. An analogue, monophonic synthesizer with classic step entry programming by the user or Bot computer-generated patterns. Seven unique preset personality programs, capable to generate up to 224 read only computer generated presets by the Bass Bot. An additional 224 Write Editable Patterns can compose up to 7 songs of up to 127 bars. All information is saved to on-board flash (permanent) memory and transferable directly to other Bass Bots via 8 DIN cable, (unit cloning) or to PC/MAC (backup) computers for storage with a downloadable transfer application available.

Supplied with Euro two pin to UK three pin adapter

Notes: ***B-STOCK: Without original box, product in perfect working order***


Bass Bot is an intelligent sequencer featuring 21st century transistor technology. An analogue, monophonic synthesizer with classic step entry programming by the user or Bot computer-generated patterns. Seven unique preset personality programs, capable to generate up to 224 read only computer generated presets by the Bass Bot. An additional 224 Write Editable Patterns can compose up to 7 songs of up to 127 bars. All information is saved to on-board flash (permanent) memory and transferable directly to other Bass Bots via 8 DIN cable, (unit cloning) or to PC/MAC (backup) computers for storage with a downloadable transfer application available.

Supplied with Euro two pin to UK three pin adapter

Notes: Inspired by the legendary Roland TB-303, the B1 is a bargain-priced analogue acid and bass synth, featuring a built-in sequencer plus saturation and delay effects to bring your sound to life. Incredible value.

Supplier's Notes:
Donner B1 Analogue Bass Synthesizer & Sequencer with VCF, Saturation and Delay Effects

In order to provide better use experience, Donner B1 analog bass synthesizer has made unprecedented innovation in the operation interface, provide simpler and more intuitive interface for all music lovers. And this innovation won the 2022 reddot design award.

Beginner-Friendly Synthesizer Interface

Donner have optimized the sequencer of this synthesizer to be easier and more intuitive to use. Easily edit your own sequences with 128 sequence presets covering a range of musical styles, and 128 user programmable presets.

Silicone Tactile Keyboard with Backlight

The Donner B1 sequencer features modern silicone keys with a color changing backlight, making them a joy to play. In addition to sequencing, you can also play your synth lines live with the keys.

Classic Deep Bass Tone With Saturation and Delay Effects

The B1 allows you to dial in classic deep bass tones such as, distortion and tape delay. It will give you the taste of being one of the famous EDMs, Hip-Hop DJs or producers.

Flexible and Versatile Music Studio at Your Fingertips

The B1 controller connects to your DAW via USB-MIDI for use as a MIDI keyboard, and the MIDI IN/OUT interface connects the B1 to your external MIDI devices for sequencing or as a MIDI controller.Connect external sound sources using the 1/8" audio input. The 1/4" TS mono Main Out carries the main output signal. The 1/8" headphone jack is perfect for monitoring your sound. The B1's audio I/O options have you covered.

The B1 controller & sequencer features all of the deep bass and acid synthesizer sounds of the classic synth, but brings it back in a more intuitive format. Our B-1 bass synth gives you the perfect combination of retro and new school cool.

Specifications

Number of Voices: Monophonic
Type: Analog
VCF: 1 low pass
Oscillators: 1
Size: 54×323×130mm - 0.62kg (1.37 lbs)
Control Knobs: SATURATION knob, DRIVE knob, TONE knob, DELAY knob, LEVEL knob, TIME knob, FEEDBACK knob
Control Buttons: UP and DOWN, TRANSPOSE, PATTERN, TEMPO/TAP, PLAY/STOP, CLEAR, WRITE, BAR, SIGNATURE, DOTTED
Power Input: DC input connector
Power Adaptor: 9VDC 500mA inner positive
MIDI IN/OUT: MIDI In & MIDI Out, 5-pin IN
USB (MIDI): USB 2.0, Type C
Outputs: Line output: 1/4' TRS
Headphones: 3.5mm TRS
Supported Operating Systems: Win 7 or higher / Mac OS X 10.6.8 or higher
Inputs & Outputs (TS 3.5mm): AUX in: maximum input +5 dBu, Sync in: More than 2.5V
Number of Voices: Monophonic
Type: Analogue
VCF: 1 low pass
Oscillators: 1
Size: 54×323×130mm 0.62kg (1.37 lbs)
Control Knobs: SATURATION knob, DRIVE knob, TONE knob, DELAY knob, LEVEL knob, TIME knob, FEEDBACK knob
Control Buttons: UP and DOWN, TRANSPOSE, PATTERN, TEMPO/TAP, PLAY/STOP, CLEAR, WRITE, BAR, SIGNATURE, DOTTED
Power Input: DC input connector
Power Adaptor 9VDC 500mA inner positive
MIDI IN/OUT: MIDI In & MIDI Out, 5-pin IN
USB (MIDI): USB 2.0, Type C
Outputs: Line output: 1/4' TRS
Headphones: 3.5mm TRS
Supported Operating Systems: Win 7 or higher / Mac OS X 10.6.8 or higher
Inputs & Outputs (TS 3.5mm): 3.5mm TRS

Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


Inspired by the legendary Roland TB-303, the B1 is a bargain-priced analogue acid and bass synth, featuring a built-in sequencer plus saturation and delay effects to bring your sound to life. Incredible value.

Supplier's Notes:
Donner B1 Analogue Bass Synthesizer & Sequencer with VCF, Saturation and Delay Effects

In order to provide better use experience, Donner B1 analog bass synthesizer has made unprecedented innovation in the operation interface, provide simpler and more intuitive interface for all music lovers. And this innovation won the 2022 reddot design award.

Beginner-Friendly Synthesizer Interface

Donner have optimized the sequencer of this synthesizer to be easier and more intuitive to use. Easily edit your own sequences with 128 sequence presets covering a range of musical styles, and 128 user programmable presets.

Silicone Tactile Keyboard with Backlight

The Donner B1 sequencer features modern silicone keys with a color changing backlight, making them a joy to play. In addition to sequencing, you can also play your synth lines live with the keys.

Classic Deep Bass Tone With Saturation and Delay Effects

The B1 allows you to dial in classic deep bass tones such as, distortion and tape delay. It will give you the taste of being one of the famous EDMs, Hip-Hop DJs or producers.

Flexible and Versatile Music Studio at Your Fingertips

The B1 controller connects to your DAW via USB-MIDI for use as a MIDI keyboard, and the MIDI IN/OUT interface connects the B1 to your external MIDI devices for sequencing or as a MIDI controller.Connect external sound sources using the 1/8" audio input. The 1/4" TS mono Main Out carries the main output signal. The 1/8" headphone jack is perfect for monitoring your sound. The B1's audio I/O options have you covered.

The B1 controller & sequencer features all of the deep bass and acid synthesizer sounds of the classic synth, but brings it back in a more intuitive format. Our B-1 bass synth gives you the perfect combination of retro and new school cool.

Specifications

Number of Voices: Monophonic
Type: Analog
VCF: 1 low pass
Oscillators: 1
Size: 54×323×130mm - 0.62kg (1.37 lbs)
Control Knobs: SATURATION knob, DRIVE knob, TONE knob, DELAY knob, LEVEL knob, TIME knob, FEEDBACK knob
Control Buttons: UP and DOWN, TRANSPOSE, PATTERN, TEMPO/TAP, PLAY/STOP, CLEAR, WRITE, BAR, SIGNATURE, DOTTED
Power Input: DC input connector
Power Adaptor: 9VDC 500mA inner positive
MIDI IN/OUT: MIDI In & MIDI Out, 5-pin IN
USB (MIDI): USB 2.0, Type C
Outputs: Line output: 1/4' TRS
Headphones: 3.5mm TRS
Supported Operating Systems: Win 7 or higher / Mac OS X 10.6.8 or higher
Inputs & Outputs (TS 3.5mm): AUX in: maximum input +5 dBu, Sync in: More than 2.5V
Number of Voices: Monophonic
Type: Analogue
VCF: 1 low pass
Oscillators: 1
Size: 54×323×130mm 0.62kg (1.37 lbs)
Control Knobs: SATURATION knob, DRIVE knob, TONE knob, DELAY knob, LEVEL knob, TIME knob, FEEDBACK knob
Control Buttons: UP and DOWN, TRANSPOSE, PATTERN, TEMPO/TAP, PLAY/STOP, CLEAR, WRITE, BAR, SIGNATURE, DOTTED
Power Input: DC input connector
Power Adaptor 9VDC 500mA inner positive
MIDI IN/OUT: MIDI In & MIDI Out, 5-pin IN
USB (MIDI): USB 2.0, Type C
Outputs: Line output: 1/4' TRS
Headphones: 3.5mm TRS
Supported Operating Systems: Win 7 or higher / Mac OS X 10.6.8 or higher
Inputs & Outputs (TS 3.5mm): 3.5mm TRS

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Inspired by the legendary Roland TB-303, the B1 is a bargain-priced analogue acid and bass synth, featuring a built-in sequencer plus saturation and delay effects to bring your sound to life. Incredible value.

Supplier's Notes:
Donner B1 Analogue Bass Synthesizer & Sequencer with VCF, Saturation and Delay Effects

In order to provide better use experience, Donner B1 analog bass synthesizer has made unprecedented innovation in the operation interface, provide simpler and more intuitive interface for all music lovers. And this innovation won the 2022 reddot design award.

Beginner-Friendly Synthesizer Interface

Donner have optimized the sequencer of this synthesizer to be easier and more intuitive to use. Easily edit your own sequences with 128 sequence presets covering a range of musical styles, and 128 user programmable presets.

Silicone Tactile Keyboard with Backlight

The Donner B1 sequencer features modern silicone keys with a color changing backlight, making them a joy to play. In addition to sequencing, you can also play your synth lines live with the keys.

Classic Deep Bass Tone With Saturation and Delay Effects

The B1 allows you to dial in classic deep bass tones such as, distortion and tape delay. It will give you the taste of being one of the famous EDMs, Hip-Hop DJs or producers.

Flexible and Versatile Music Studio at Your Fingertips

The B1 controller connects to your DAW via USB-MIDI for use as a MIDI keyboard, and the MIDI IN/OUT interface connects the B1 to your external MIDI devices for sequencing or as a MIDI controller.Connect external sound sources using the 1/8" audio input. The 1/4" TS mono Main Out carries the main output signal. The 1/8" headphone jack is perfect for monitoring your sound. The B1's audio I/O options have you covered.

The B1 controller & sequencer features all of the deep bass and acid synthesizer sounds of the classic synth, but brings it back in a more intuitive format. Our B-1 bass synth gives you the perfect combination of retro and new school cool.

Specifications

Number of Voices: Monophonic
Type: Analog
VCF: 1 low pass
Oscillators: 1
Size: 54×323×130mm - 0.62kg (1.37 lbs)
Control Knobs: SATURATION knob, DRIVE knob, TONE knob, DELAY knob, LEVEL knob, TIME knob, FEEDBACK knob
Control Buttons: UP and DOWN, TRANSPOSE, PATTERN, TEMPO/TAP, PLAY/STOP, CLEAR, WRITE, BAR, SIGNATURE, DOTTED
Power Input: DC input connector
Power Adaptor: 9VDC 500mA inner positive
MIDI IN/OUT: MIDI In & MIDI Out, 5-pin IN
USB (MIDI): USB 2.0, Type C
Outputs: Line output: 1/4' TRS
Headphones: 3.5mm TRS
Supported Operating Systems: Win 7 or higher / Mac OS X 10.6.8 or higher
Inputs & Outputs (TS 3.5mm): AUX in: maximum input +5 dBu, Sync in: More than 2.5V
Number of Voices: Monophonic
Type: Analogue
VCF: 1 low pass
Oscillators: 1
Size: 54×323×130mm 0.62kg (1.37 lbs)
Control Knobs: SATURATION knob, DRIVE knob, TONE knob, DELAY knob, LEVEL knob, TIME knob, FEEDBACK knob
Control Buttons: UP and DOWN, TRANSPOSE, PATTERN, TEMPO/TAP, PLAY/STOP, CLEAR, WRITE, BAR, SIGNATURE, DOTTED
Power Input: DC input connector
Power Adaptor 9VDC 500mA inner positive
MIDI IN/OUT: MIDI In & MIDI Out, 5-pin IN
USB (MIDI): USB 2.0, Type C
Outputs: Line output: 1/4' TRS
Headphones: 3.5mm TRS
Supported Operating Systems: Win 7 or higher / Mac OS X 10.6.8 or higher
Inputs & Outputs (TS 3.5mm): 3.5mm TRS

Notes: Reissued version of one of Dreadbox's back catalogue synths, the Erebus is a paraphonic design with two VCOs, a characterful low-pass filter, built-in delay and updated snappy envelopes.

Supplier's Notes:
Dreadbox's most unique sounding analogue synthesizer is finally back, warmer and snappier than ever!

All you synth lovers, the time has come to dive into the Erebus...

All Analogue Paraphonic Synthesizer
Faithful Reproduction of the Erebus V1
2 Oscillators with 2 Waveforms each
Separate Glide controls and Hard Sync function
2-pole Low Pass pre-fed Filter
1 ADSR envelope and a AR Amp Envelope
Snappier than the V1

OTA VCA
Lo-Fi Delay effect
Wide Range LFO
15 patch points for an astonishing and spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Ethereal & Dreamy

Warm sounding Oscillators
Classic Dreadbox Filter
Snappy Envelope Generators
Lo-Fi Delay effect to expand your sound
CV outputs: Envelope, LFO, Mod Wheel, Gate, CV1, CV2
CV inputs: Osc1, Osc2, Echo, Cutoff, CV, Gate, LFO Rate, PW, VCA

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 1 kg

Requirements:

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box:

Erebus Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter
1x Ribbon cable

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Reissued version of one of Dreadbox's back catalogue synths, the Erebus is a paraphonic design with two VCOs, a characterful low-pass filter, built-in delay and updated snappy envelopes.

Supplier's Notes:
Dreadbox's most unique sounding analogue synthesizer is finally back, warmer and snappier than ever!

All you synth lovers, the time has come to dive into the Erebus...

All Analogue Paraphonic Synthesizer
Faithful Reproduction of the Erebus V1
2 Oscillators with 2 Waveforms each
Separate Glide controls and Hard Sync function
2-pole Low Pass pre-fed Filter
1 ADSR envelope and a AR Amp Envelope
Snappier than the V1

OTA VCA
Lo-Fi Delay effect
Wide Range LFO
15 patch points for an astonishing and spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Ethereal & Dreamy

Warm sounding Oscillators
Classic Dreadbox Filter
Snappy Envelope Generators
Lo-Fi Delay effect to expand your sound
CV outputs: Envelope, LFO, Mod Wheel, Gate, CV1, CV2
CV inputs: Osc1, Osc2, Echo, Cutoff, CV, Gate, LFO Rate, PW, VCA

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 1 kg

Requirements:

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box:

Erebus Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter
1x Ribbon cable

Notes: Dreadbox go back to their roots with this reissued analogue beast. Simple but effective single-oscillator monophonic design with a three-pole resonant filter and analogue distortion.

Supplier's Notes:
Dreadbox's highly anticipated Bass Synthesizer is finally back.

Its Deep and Dark sound is here to haunt you ...

All Analogue Bass Synthesizer
Faithful Reproduction of the 2016 Hades
1 Oscillators with 2 Sub Octaves and 2 Waveforms with PW control
3-pole Resonating Low Pass Filter
1 AD/RS envelope and a AR Amp Envelope

OTA VCA
OTA Distortion
Wide Range Triangle LFO
11 patch points for an astonishing spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Monophonic Epicness
Super Fat Oscillator
2x Sub Octaves for extra headroom
Special Internal Bass Boost Circuit
Warm Filter
Drive effect for aggressive sounds
CV outputs: Envelope, LFO, Mod Wheel, 1v/oct
CV inputs: PW, Cutoff, VCA, CV, Gate

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 0.9 kg

Requirements

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box

Hades Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter (specs as found at midi.org)
1x Ribbon cable

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Dreadbox go back to their roots with this reissued analogue beast. Simple but effective single-oscillator monophonic design with a three-pole resonant filter and analogue distortion.

Supplier's Notes:
Dreadbox's highly anticipated Bass Synthesizer is finally back.

Its Deep and Dark sound is here to haunt you ...

All Analogue Bass Synthesizer
Faithful Reproduction of the 2016 Hades
1 Oscillators with 2 Sub Octaves and 2 Waveforms with PW control
3-pole Resonating Low Pass Filter
1 AD/RS envelope and a AR Amp Envelope

OTA VCA
OTA Distortion
Wide Range Triangle LFO
11 patch points for an astonishing spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Monophonic Epicness
Super Fat Oscillator
2x Sub Octaves for extra headroom
Special Internal Bass Boost Circuit
Warm Filter
Drive effect for aggressive sounds
CV outputs: Envelope, LFO, Mod Wheel, 1v/oct
CV inputs: PW, Cutoff, VCA, CV, Gate

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 0.9 kg

Requirements

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box

Hades Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter (specs as found at midi.org)
1x Ribbon cable

Notes: Boutique analogue goodness inspired by chthonic demi-goddesses. Obviously. Six-voice synth engine with fully analogue signal path plus digital reverb. Compact and powerful with a lush, distinctive sound.

Supplier's Notes:
Nymph(e)s are chthonic demi-goddesses who not only personify nature but are regularly associated with the wild.

They inhabit rivers, springs, woods, groves, fields, caves, mountains and valleys.

They preside over fountains, sacred wells and fresh water.

The Polyphonic Synthesizer N Y M P H E S was developed during the obscure pandemic times and we really hope that it will bring a pinch of happiness on your face. Dreadbox have attempted to condense an ambitious idea in a small and compact box, without any compromise in the quality of the final instrument.
The result is stunning and ethereal ...

Features per Voice

1x VCO with Wave Forming
1x Sub Oscillator
Noise generator
1x LFO per voice with: Key track, Fade In and Fade out, 5 waveforms and wide frequency (into the FM range)
2x Envelope Generators
24dB/octave Low Pass Resonant Filter with accurate tracking
6dB/octave High Pass Non-Resonant Filter

Common

Voice Features

1x common LFO (named LFO2) that can target any and multiple parameters with different amount to each one at the same time , with: Key track, Fade In and Fade out, 5 waveforms and Wide Frequency (into the FM range)
7x active Chords that you can edit, modulate and store on each preset
Modulation wheel, Velocity and Aftertouch (monophonic) can target any and multiple parameters with different amount to each one at the same time

Specifications & Connections:

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via USB or DIN5
1/4 MONO TS Jack Out
1/8 Headphones Out

Dimensions: 24 x 12.5 x 3.8 cm
Weight: 0.85 kg

Requirements

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with either USB HOST or DIN5 midi output
Monitor, Amp or Headphones

Included in the box

USB cable (A to B)
DIN5 to 3.5mm adapter (specs as found at midi.org)
Quick Start Guide
Menu Map

IMPORTANT NOTE:
True power consumption is at 310mA. Some computers cannot deliver that much current. Please make sure that your device has sufficient current for Nymphes before connecting it- otherwise if you want to connect it with a computer, you will need a USB splitter or a powered USB hub.
When using a USB adapter, always make sure it can deliver 1000mA or more.